Duplex and Quad GFCI Boxes

Quad and Duplex GFCI Boxes from Southwire/TRC

Contact Sords Electric HERE! 

A ground fault circuit interrupter (GFCI) can help prevent electrocution. If a person’s body starts to receive a shock, the GFCI senses this and cuts off the power before he/she can get injured.

According to the National Electrical Code, a “ground fault” is a conducting connection (whether intentional or accidental) between any electric conductor and any conducting material that is grounded or that may become grounded. Electricity always wants to find a path to the ground. In a ground fault, electricity has found a path to ground, but it is a path the electricity was never intended to be on, such as through a person’s body.

Because of this potential for shock, GFCI protection is used to protect human life.

Note: AFCIs should not be confused with GFCIs. While both AFCIs and GFCIs are important safety devices, they have different functions. AFCIs are intended to address fire hazards; GFCIs address shock hazards.

Southwire TRC Duplex GFCI Box 28438802

15A In-Line GFCI Portable Duplex Box 12/3 Cord Set. P/N 28438802

• 120V/15A In-Line GFCI Duplex Box 12/3 Cord Set NEMA 5-15P (2) 5-15R
• Volts/Amps: 120V/15A
• Cord Gauge: 12/3 AWG
• NEMA 5-15P & (2) 5-15R
• Trip Level: 4 - 6 mA
• cULus Listed
• Rainproof Rated

TRC Southwire Quad GFCI Box 284688023

20A In-Line GFCI Portable Quad Box 12/3 Cord Set P/N 284688023 - (15 amp version is P/N 28458802 - 5-15P)

• 120V/20A In-Line GFCI Quad Box 12/3 Cord Set NEMA L5-20P (4) 5-20R
• Volts/Amps: 120V/20A
• Cord Gauge: 12/3 AWG
• NEMA L5-20 Twist-Lock Plug & (4) 5-20 Straight Blade Receptacles
• Trip Level: 4 - 6 mA
• cULus Listed
• Rainproof Rated

GFCI Quad Box 20 amps, 120 volts, 

25080122

20A In-Line GFCI Quad Box 12/3 Cord Set

P/N is 25080122-3 

• 120V/20A In-Line GFCI Quad Box 12/3 Cord Set NEMA 5-20P (4) 5-20R
• Volts/Amps: 120V/20A
• Cord Gauge: 12/3 AWG
• NEMA 5-20P & (4) 5-20R
• Trip Level: 4 - 6 mA
• cULus Listed
• Rainproof Rated

TRC Quad Box GFCI p/n 14880003

Right Angle GFCI Quad Box 12/3 Cord Set

P/N 14880003-3 ~ 6ft. cord  (50' Cord model # is 14880450-1)

• Volts/Amps: 120V/15A
• Cord Gauge: 12/3 AWG
• NEMA 5-15P & (4) 5-15R
• Trip Level: 4 - 6 mA
• cULus Listed
• Rainproof Rated

For a Quote, Click  HERE! 

14880402-3, 26020009-3, 26020004-1, 25080122-3, 

28458802, 25080123-2, 28438802, 28468802, 14880121-1

Sords Electric

216-765-4230

www.sordselectric.com

GFCI...TRC...SOUTHWIRE...GFCI...TRC...SOUTHWIRE

Littelfuse SIR Solid State Relays

 SIR Littelefuse Solid State Relays from Sords Electric

The Littelfuse SIR Series is designed for industrial applications requiring rugged reliable operation. Provides an optically isolated, high capacity, solid-state output, with power switching capability up to 20A steady state, 200A inrush. Zero voltage switching SIR2 extends the life of an incandescent lamp up to 10 times. Random switching SIR1 is ideal for inductive loads. When fully insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections.

Contact Sords Electric HERE!

Littelfuse SIR 20 Amp Solid State Relays

Operation:

The solid-state output is located between terminals 1 and 3, and is normally open or normally closed without control voltage applied to terminals 4 and 5. When control voltage is applied to terminals 4 and 5, the solid-state output opens or closes respectively. Reset: Removing control voltage resets the output. The unit is also reset if output voltage is removed.

FEATURES    >>>    BENEFITS 

Compact design measures 2 in. (50.8mm) square >>  Perfect for OEM applications where space is limited 

Totally solid state and encapsulated >>  No moving parts to arc and wear out over time and encapsulated to protect against shock, vibration and humidity 

Up to 20A, 200A inrush output rating >>  Provides direct control of heavy inductive, incandescent or resistive loads 

Switching output is optically isolated from the control input  >>  Provides the ability to interface between 2 different electrical circuits 

SIR1 models provide random switching >>  Designed for use with resistive and incandescent loads, extending lamp life up to 10 times 

SIR2 models provide zero voltage switching >> Perfect for resistive and incandescent loads

Metalized mounting surface >> Facilitates heat transfer in high current applications

Littelfuse Model Numbers

MODEL   SWITCHING   CONTROL VOLTAGE  RATING  OUTPUT FORM   OUTPUT VOLTAGE 

SIR1A1A4  Random  9 to 30VAC or DC 3A Normally open 120VAC 

SIR1A20A4  Random 9 to 30VAC or DC 20A Normally open 120VAC 

SIR1B6B4  Random 90 to 150VAC or DC 6A Normally closed 120VAC 

SIR1C20B6  Random 190 to 290VAC or DC 20A Normally closed 230VAC 

SIR2A20A4  Zero Cross 9 to 30VAC or DC 20A Normally open 120VAC 

SIR2B20A4  Zero Cross 90 to 150VAC or DC 20A Normally open 120VAC 

SIR2B20B4  Zero Cross 90 to 150VAC or DC 20A Normally closed 120VAC

Contact Sords Electric HERE!

Sords Electric
216-765-4230
www.sordselectric.com

Littelfuse SIR1...Littelfuse SIR2...Littelfuse SIR1...Littelfuse SIR2...Littelfuse SIR...1

ATC SLM Voltage Monitor

Sords Electric sells the ATC SLM series 3 Phase Voltage Monitor

The SLM Series Microprocessor-based Three-Phase Monitor from the ATC Diversified Electronics division of Marsh Bellofram Corporation is a microprocessor based 3 phase monitor. This device protects 3 phase equipment from under voltage, over voltage, phase loss, phase reversal, phase unbalance, phase shift and frequency shift. Models available up to 690 vac and comes complete with automatic or manual reset, delay-on-make timer, LED indicators for fault conditions and last fault memory.

ATC Diversified Voltage Monitor SLM

Features

Models available to 690 VAC

Automatic or Manual Reset

Delay-On-Make Timer

LED Indicators for Fault Conditions

Last Fault Memory

Screw Driver Adjustment for Time Delay, 

Voltage and Mode of Operation

The ATC Diversified voltage monitor 

SLM series protects against :

Under Voltage

Over Voltage

Phase Loss

Phase Reversal

Phase Unbalance

Phase Shift

Frequency Shift

Part Numbers are :

SLM-120-ASE (Max Voltage is 143)
SLM-230-ASE (Max Voltage is 275)
SLM-380-ASE (Max Voltage is 457)
SLM-440-ASE (Max Voltage is 540)
SLM-575-ASE (Max Voltage is 690)


Sords Electric
216-765-4230
www.sordselectric.com

Q'Mark Wall Heater CWH3150F for small Spaces

QMark CWH3150F 1500 Watt, 120 Volt Wall Heater - In Stock At Sords Electric

The Q'Mark CWH 3150F replaces the Q'Mark CWH3150 with a new styles grill. The heater itself remains the same dependable electric wall heater before the aesthetic upgrade.

The Qmark CWH3000 series can be used in residential, commercial or industrial areas that need forced air heat for comfort. The QMark series CWH comes in wattages from 1500 to 4800 or 1.5 kw - 4.8 kw. The AC voltage choices are 120, 208, 240, 277, 347 and 600.  The CWH 3150F is 120 volts AC and 1.5 kw. There are no DC units available. 

The Q'Mark CWH3150F will preform exceptionally well in hotel foyers, restaurant vestibules, department store hallways, fast food entryways, commercial showrooms, mechanical rooms, medical offices, basements and offices. Not an outdoor heater.

Q'Mark Commercial Wall Heater CWH3150F

CWH3150F - CWH 3000 series

Features include:

Optimized air flow through a commercial steel grill

Northern White standard finish

Integral Double Pole Thermostat with 40-85 F range

Fan Only option for summer

Built in Power on/off switch for safety and maintenance

Manual Reset Thermal over heat protector

Fan Delay Switch which delays the fan until the elements are hot so only hot air is discharged from the heater.

1 year workmanship warranty and 5 year warranty for the heating element.

ETL approved and cUS listed.

The below are the five options for the QMark CWH3150F.

FRAFCTPF - Tamper Proof Cover
CWH3SM - Surface Mount Frame
CWH3S1 - 1 inch semi-recessed frame
CWH3S2 - 2 inch semi-recessed frame
LFKSFCNW - 14 gauge security front cover
(All the above are Northern White in color.)

www.sordselectric.com
216-765-4230

Q'Mark CWH1151DSAF Architectural Small Wall Heater

Sords Electric Stocks The QMark CWH1151DSAF Wall Heater

KW: 1.5     /  Volts: 120 AC 
BTU: 5120  /  Amps: 12.5

The Q Mark CWH series Wall Heaer is great for smaller spaces like bathrooms, hall ways, dens, small offices, vestibules, breezeways, workshops, work out rooms and small garages.
(See our Garage Heater GH48R for larger garages and ceiling mount).
The Q'Mark CWH1151DSAF has a fast heat response with a compact design and puts out 5102 BTUS or 1500 watts. The bar-stock grill in bronze is designed for optimal airflow.
The heater series can come n vantages of 120. 208, 240 or 277 and wattages up to 2000.

Included with the the Qmark  CWH 1151DSAF :

Integral Thermostat: 40-85 F

Fan Delay Switch which delays the fan coming on until there is warm air to discharge.

Manual Reset Thermal overload protector for protecting against an inadvertent over heating situation, like an air flow blockage.

1 year workmanship warranty and 5 years on the element.

Do Not install closer than 4 inches to the floor.
Do Not install behind a towel rack, draperies, behind a door, in a closet or other obstructed space.

The heater size is 10-5/8 x 12-1/8 x 4 Inches

Click HERE to order.

Click HERE to contact Sords Electric.

216-765-4230
info@sordselectric.com

Q'Mark Residential Infrared/Radiant Heater QHRA11115W.

Sords Electric Stocks the Qmark HRA11115W 
Radiant Heater


The Q'Mark Infrared QHRA11115W heater is ideal for residential and light Commercial spot heating in Basements, Patio, Terraces, Verandas, Gazebos, Door Steps, Changing Rooms, Health Spas, Hotels, pubs and Outdoor Bars. The heater is wall mounted at least 7 feet above the floor. The Heater's specifications are 1500 watts, 120 volts, 5115 BTU, and standard 120 volt plug. Heater is cUL and ETL listed.

Q Mark Radiant Heater HRA Style

UPC 685360163710
Volts  120
Phase  1
Amps  12.5
Watts  1500
BTU   5115
Dimensions  17-15/16" x 3-1/2" x 5-1/8"  (LxWxH)


Notes:
Q'Mark Heater to be WALL mounted ONLY with included wall mount bracket.  Do NOT mount heater to a ceiling.
QMark HRA Heater MUST be mounted at least 8'3" above the floor.
The top of Q Mark QHRA heater MUST be at least 12 inches from the ceiling and have 36 inch space on each side from any walls.
(The heater gets hot).

Click HERE to purchase.

Other Radiant heaters from Q'Mark:

QHRA66420B  240 volts, 2000 watts, 6824 BTU
QVRC4420SG  240 VOLTS, 2000 WATTS, 6824 BTU
QVRC4440DTG  240 VOLTS, 4000 WATTS, 13648 BTU
QVRC4440DWG  240 VOLTS, 4000 WATTS, 13648 BTU

Call for information.
www.sordselectric.com
800-929-2845

ATC 365 Long Ranger Timer

ATC Automatic timing and Controls 365C Long-Ranger Computing Timer from Sords Electric

Industry standard digital timer

Adjustable range 0.01 sec. to 999 hours

High brightness VF display

High noise immunity

UL recognized

The ATC 365C Timer is microprocessor-based digital timer with three rotary knobs for setting and adjustment of the Preset. The Preset can be any three-digit value from .01 Sec to 999 Hrs. The Decimal and Range are switch selectable. The high-intensity blue vacuum fluorescent display is DIP switch selectable to Timeup or Timedown. Two heavy-duty 7A DPDT relays provide instantaneous, interval or delayed output control. Plug-in panel mounting allows easy replacement without the removal of field wiring.

COMPUTATION: Through its internal microcomputer, the 365C keeps track of the set point throughout the time cycle. Whenever there is a change in set point, even during a cycle, it instantly re-computes the time remaining and accurately determines time-out. This unique capability is especially valuable in the time-down modes as it allows you to shorten a cycle without loss of accuracy.

POSITIVE RESET TIME AND PULSE LENGTH: Digitally clocked by the microcomputer, the 365C’s reset time is consistently of the same duration, regardless of variations in line voltage, power supply or time cycle. As a result, the 365C is not subject to false reset from momentary power interruptions (less than 30 ms). When the 365C operates in repeat-cycle mode, the output pulse is also digitally clocked so that both its occurrence and duration are consistent.

WIDE RANGE: Each 365C Long-Ranger covers the overall span of 0.01 sec. to 999 hrs., in nine switch-selected ranges of 0 to 9.99,99.9 or 999 sec., min. or hrs. The timer can be optimized within any selected range simply by removing appropriate selector knobs (e.g. with the timer in the 9.99 sec. range, you can obtain a tamper-proof span of 0.99 by setting the left selector at 0 and removing the knob).

PROGRAMMABLE DISPLAY: Depending on the position of an internal jumper, the 365C’s three-digit cycle progress display will time UP to or DOWN from the set point; after time-out, it will either STOP or GO (i.e. display the time elapsed after time-out). To the right of the three-digit display, a timing bar “–” blinks once per second during the timing cycle and rapidly after time-out. At left, a marker “∇” turns on when the delayed relay is energized. The 365C is also available without display but with a pilot light that blinks once per second during the cycle and rapidly after time-out.

NOISE IMMUNITY: The 365C has formidable defenses against noise: transformer power supply, full-wave bridges, buffered logic. Furthermore its microcomputer detects; and rejects; noise pulses that manage to penetrate its defenses. No industrial timer has ever offered greater noise immunity.

RELIABILITY AND RUGGEDNESS: ATC firmly believes that no industrial timer has ever achieved a higher level of reliability and ruggedness. The 365C’s electronic components have no moving parts and are assembled, virtually without hand wiring, from computer-tested circuit boards. Its few mechanical components have been selected for reliable service; the two load relays have a life expectancy of 100,000,000 operations and heavy-duty contacts rated at 7 amps; and the three rotary set point selector switches exhibit extremely low wear.

COMPACT, PLUG-IN AND DUST-TIGHT: Packaged in a 72mm2 DIN housing, the 365C occupies 40% less panel space than conventional timers. It is a true plug-in timer that can be replaced in seconds without disturbing housing or wiring. The 365C is also fully gasketed and O-ring sealed to be dust and water-tight.

SELF DIAGNOSTICS: The time will display “FAIL” anytime there is a problem or the knobs are in between digits.

ATC 365 DIGITAL PLUG IN TIMER, 120 VAC, 0-999 hours

ATC 365 DIGITAL PLUG IN TIMER, 240 VAC, 0-999 hours

ATC 365 DIGITAL PLUG IN TIMER, 120 VAC, 0-999 hours w/Memory

www.sordselectric.com

800-929-2845

Strip Heaters with Offset Terminals

Sords Electric supplies Strip Heaters

Component heaters (Strip, Ring, Band, Cartridge) by themselves meet many heating needs. They can also be integrated into more complex heating systems to provide a complete thermal solution for your heating requirements. Shape and size most often are the determining factor in most heater applications. 
Strip heaters are used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces.

Applications:

• Food warming
• Freeze and moisture protection
• Tank and platen heating
• Packaging
• Dies and mold heating
• Autoclaves
• Ovens
• Telecom

High Quality, Coiled Alloy Resistor Wire is uniformly spaced over the width and length of the strip heater to assure even heat distribution.

Resistor Wire is Embedded in specially formulated, high-grade refractory mate- rial which both insulates the resistor and transfers heat rapidly to the sheath.

Refractory is then Compressed to Rock- Hardness and high density under tremen- dous hydraulic pressure to maximize heat transfer from coil to sheath. Elements are oven cured at high temperatures to semi- vitrify and mature the refractory.

Maximum Heat Transfer, from the instant the element is first energized, is provided by the high emissivity black oxide finish. El- ements with shiny surfaces do not transfer heat as well.

Strip Heaters can have parallel terminals, one terminal at each end and offset terminals, the most common.

Housings can be purchased for the terminals as an options.

Strip Heaters by Watlow and Chromalox.

216-765-4230

info@sordselectic.com

Chromalox Strip and Band Heaters

Sords Electric Chromalox Strip Heaters and Ring Heater Stock

call to order - 800-929-2845

PCN 121005	CHROMALOX OT2550 STRIP HEATER
PCN 121021	CHROMALOX STRIP HTR OT2575 120V, 500W
PCN 121030	CHROMALOX STRIP HTR OT2575 240V, 750W
PCN 121232	CHROMALOX STRIP HTR OT2501 240V, 1000W
PCN 121291	CHROMALOX STRIP HTR  OT3001 240V, 1000W
PCN 123035	CHROMALOX PHD-55-2-12 DRUM HTR 240V, 120W
PCN 128485	CHROMALOX OTF-180, 240V, 1550W
PCN 129234	CHROMALOX STRIP HTR OT2415 240V, 1500W
PCN 129357	CHROMALOX STRIP HEATER OT817 120V, 175W
PCN 129381	CHROMALOX OT-1025 STRIP HEATER 240V, 250W
PCN 129390	CHROMALOX OT-1225 120V HEATER
PCN 129402	CHROMALOX OT1225 240V HTR.
PCN 129533	CHROMALOX OT1950 STRIP HEATER 120V, 500W
PCN 129699	CHROMALOX STRIP HTR OT1004 120V, 400W
PCN 129760	CHROMALOX STRIP HTR #OT1205 240V, 500W
PCN 129963	CHROMALOX OT2405 STRIP HEATER 240V, 500W
PCN 131182	CHROMALOX STRIP HTR, S1430 240V, 300W
PCN 131211	CHROMALOX S-1837 STRIP HEATER 120V, 375W
PCN 131270	CHROMALOX STRIP HTR S-2050 120V, 500W
PCN 131959	CHROMALOX STRIP HTR PT512 120V, 125W
PCN 132839	CHROMALOX STRIP HTR  WS806 120V, 600W
PCN 132919	CHROMALOX STRIP HTR SN910 120V, 100W
PCN 132935	CHROMALOX SN-1215 STRIP HEATER 120V, 150W
PCN 132951	CHRMALOX STRIP HTR SN1520 240V, 200W
PCN 133735	CHROMALOX STRIP HTR SNH09 120V, 300W
PCN 133751	CHROMALOX SNH12 STRIP HEATER 120V, 400W
PCN 135351	CHROMALOX A-20 RING HEATER 120V, 500W
PCN 135407	CHROMALOX RING HTR A20 240V, 500W
PCN 135722	CHROMALOX A-50 RING HEATER 240V, 400W
PCN 135870	CHROMALOX A65 RING HEATER 120V, 1000W
PCN 136215	CHROMALOX A80 ROUND HEATER 120V, 1050W
PCN 140636	CHROMALOX PIT-35

www.sordselectric.com

Use our contact form HERE.

Strip Heaters ~ Watlow >> Chromalox

Sords Electric can provide Strip heaters.

Strip Heaters are used to heat a surface and should be clamped or banded to the surface.
The most commoN strips are 1.5 inches wide and up to about 36 inches in length and have offset terminals, meaning two terminals at one end but offset to each other. Strip heater are usually 120 volts or 240 volts.  Wattages are from 150 to 2250.

Below is a Chromalox to Watlow Cross reference
These strip heaters have OFFSET terminals at one end, hence the OT for Offset Terminals.

Chromalox OT-715 / 129314  >> Watlow SGA1J7JO1
120 volts, 150 watts

Chromalox 0T-715 / 129322  >> Watlow SGA1J7JO2

240 volts, 200 watts

Chromalox OT-702 / 129621  >> Watlow SGA1J7JO3

240 volts, 150 watts

Chromalox OT-815 / 129330  >> Watlow SGA1J8AO1

120 volts, 150 watts

Chromalox 0T-815 / 129349  >> Watlow SGA1J8AO5

240 volts, 150 watts

Chromalox OT-817 / 129357  >> Watlow SGA1J8AO6

120 volts, 175 watts

Chromalox 0T-817 / 129365  >> Watlow SGA1J8AO7

240 volts, 175 watts

Chromalox OT-802 / 129630  >> Watlow SGA1J8AO2

120 volts, 250 watts

Chromalox 0T-802 / 129648  >> Watlow SGA1J8AO8

240 volts, 250 watts

Chromalox OT-804 / 129656  >> Watlow SGA1J8AO9

120 volts, 400 watts

Chromalox 0T-804 / 129664  >> Watlow SGA1J8AO10

240 volts, 400 watts

Chromalox OT-1025 / 129373  >> Watlow SGA1J10AO1

120 volts, 250 watts

Chromalox 0T-1025 / 129381  >> Watlow SGA1J10AO2

240 volts, 250 watts

Chromalox OT-1003 / 129672  >> Watlow SGA1J10JO8

120 volts, 350 watts

Chromalox 0T-1003 / 129680  >> Watlow SGA1J10JO5

240 volts, 350 watts

Chromalox OT-1004 / 129699  >> Watlow SGA1J10JO6

120 volts, 400 watts

Chromalox 0T-1004 / 129701  >> Watlow SGA1J10JO7

240 volts, 400 watts

Chromalox OT-1225 / 129390  >> Watlow SGA1J12AO1

120 volts, 250 watts

Chromalox 0T-1225 / 129402  >> Watlow SGA1J12AO2

240 volts, 250 watts

Chromalox OT-1202 / 129710  >> Watlow SGA1J12AO1

120 volts, 250 watts

Chromalox 0T-1202 / 129728  >> Watlow SGA1J12A02

240 volts, 250 watts

Chromalox OT-1203 / 129736  >> Watlow SGA1J12AO5

120 volts, 350 watts

Chromalox 0T-1203 / 129744  >> Watlow SGA1J12AO6

240 volts, 350 watts

Chromalox OT-1205 / 129752  >> Watlow SGA1J12AO3

120 volts, 500 watts

Chromalox 0T-1205 / 129760  >> Watlow SGA1J12AO4

240 volts, 500 watts

Chromalox OT-1430 / 129410  >> Watlow SGA1J14AO2

120 volts, 300 watts

Chromalox 0T-1430 / 129429  >> Watlow SGA1J14AO1

240 volts, 300 watts

Chromalox OT-1405 / 129779  >> Watlow SGA1J14AO3

120 volts, 500 watts

Chromalox 0T-1405 / 129787  >> Watlow SGA1J14AO4

240 volts, 500 watts

Chromalox OT-1532 / 129437  >> Watlow SGA1J15EO2

120 volts, 325 watts

Chromalox 0T-1532 / 129445  >> Watlow SGA1J15EO2

240 volts, 325 watts

Chromalox OT-1505 / 129808  >> Watlow SGA1J15EO4

240 volts, 500 watts

Chromalox OT-1835 / 129453  >> Watlow SGA1J17RO4

120 volts, 350 watts

Chromalox 0T-1835 / 129461  >> Watlow SGA1J17RO5

240 volts, 350 watts

Chromalox OT-1837 / 129470  >> Watlow SGA1J17RO5

120 volts, 375 watts

Chromalox 0T-1837 / 129488  >> Watlow SGA1J17RO7

240 volts, 375 watts

Chromalox OT-1850 / 129496  >> Watlow SGA1J17RO1

120 volts, 500 watt

Chromalox 0T-1850 / 129509  >> Watlow SGA1J17RO2

240 volts, 500 watts

Chromalox OT-1807 / 129832  >> Watlow SGA1J17RO9

120 volts, 750 watts

Chromalox 0T-1807 / 129840  >> Watlow SGA1J17RO8

240 volts, 750 watts

Chromalox OT-1801 / 129859  >> Watlow SGA1J17RO10

120 volts, 1000 watts

Chromalox 0T-1801 / 129867  >> Watlow SGA1J17RO3

240 volts, 1000 watts

Chromalox OT-1935 / 129525  >> Watlow SGA1J19JO6

240 volts, 350 watts

Chromalox OT-1950 / 129533  >> Watlow SGA1J19JO7

120 volts, 500 watt

Chromalox 0T-1950 / 129541  >> Watlow SGA1J19JO4

240 volts, 500 watts

Chromalox OT-1905 / 129875  >> Watlow SGA1J19JO7

120 volts, 500 watt

Chromalox 0T-1905 / 129883  >> Watlow SGA1J19JO4

240 volts, 500 watts

Chromalox OT-1907 / 129904  >> Watlow SGA1J19JO6

240 volts, 750 watts

Chromalox OT-1901 / 129920  >> Watlow SGA1J19JO1

240 volts, 1000 watts

Chromalox OT-2150 / 129550  >> Watlow SGA1J21AO1

120 volts, 500 watt

Chromalox 0T-2150 / 129568  >> Watlow SGA1J21AO2

240 volts, 500 watts

Chromalox OT-2107 / 129939  >> Watlow SGA1J21AO3

120 volts, 750 watt

Chromalox 0T-2107 / 129947  >> Watlow SGA1J21AO3

240 volts, 750 watts

Chromalox OT-2450 / 129576  >> Watlow SGA1J23NO5

120 volts, 500 watt

Chromalox 0T-2450 / 129584  >> Watlow SGA1J23NO6

240 volts, 500 watts

Chromalox OT-2405 / 129955  >> Watlow SGA1J23NO5

120 volts, 500 watt

Chromalox 0T-2405 / 129963  >> Watlow SGA1J23NO6

240 volts, 500 watts

Chromalox OT-2475 / 129592  >> Watlow SGA1J23NO1

120 volts, 750 watt

Chromalox 0T-2475 / 129605  >> Watlow SGA1J23NO2

240 volts, 750 watts

Chromalox OT-2407 / 129971  >> Watlow SGA1J23NO1

120 volts, 750 watt

Chromalox 0T-2407 / 129980  >> Watlow SGA1J23NO2

240 volts, 750 watts

Chromalox OT-2401 / 129998  >> Watlow SGA1J23NO7

120 volts, 1000 watt

Chromalox 0T-2401 / 130008  >> Watlow SGA1J23NO3

240 volts, 1000 watts

Chromalox OT-2415 / 129234  >> Watlow SGA1J23NO3

240 volts, 1500 watts

Chromalox OT-2550 / 121005  >> Watlow SGA1J25JO1

120 volts, 500 watt

Chromalox 0T-2550 / 121013  >> Watlow SGA1J25JO2

240 volts, 500 watts

Chromalox OT-2575 / 121021  >> Watlow SGA1J25JO3

120 volts, 750 watt

Chromalox 0T-2575 / 121030  >> Watlow SGA1J25JO4

240 volts, 750 watts

Chromalox OT-2507 / 121208  >> Watlow SGA1J25JO3

120 volts, 750 watt

Chromalox 0T-2507 / 121216  >> Watlow SGA1J25JO4

240 volts, 750 watts

Chromalox OT-2501 / 121232  >> Watlow SGA1J25JO5

240 volts, 1000 watts

Chromalox OT-2670 / 121056  >> Watlow SGA1J26NO1

240 volts, 700 watts

Chromalox OT-2601 / 121259  >> Watlow SGA1J26NO2

240 volts, 1000 watts

Chromalox OT-3075 / 121080  >> Watlow SGA1J30JO2

120 volts, 750 watt

Chromalox 0T-3075 / 121099  >> Watlow SGA1J30JO3

240 volts, 750 watts

Chromalox OT-3007 / 121267  >> Watlow SGA1J30JO2

120 volts, 750 watt

Chromalox 0T-3007 / 121275  >> Watlow SGA1J30JO3

240 volts, 750 watts

www.sordselectric.com  ~  216-765-4230

Cleveland, Ohio USA