Altech Industrial Automation Products

 Altech  Industrial  Products  from  Sords  Electric

Altech Automation Industrial Products

For a Quote, Contact us HERE!

Altech Circuit Protection Devises

Altech Busbar and Power Distribution

Altech Contactors

Altech Overload Relays

Altech Manual Motor Starters

Altech Motor Disconnect Switches

Altech European Fuses and holders

Altech Pin and Sleeve Devices

Altech Receptacles

Altech Industrial and ATEX Enclosures

Altech DIN rail Mounted Electronic Enclosures

Altech Control Enclosures

Altech Suspension Systems

Altech Industrial Foot SwitchesMedical Foot Switches

Altech Interface Modules and Safety Relays

Altech Industrial and SlimLine Relays

Altech Panel Lights & Heaters, Filters

Altech 22 & 30 mm Push Buttons

Altech Pilot Lights and E-Stops

Altech Power Supplies

Altech DC UPS and Battery Chargers

Altech Smart Relays

Altech Digital Panel Meters

Altech Digital Timers

Altech Keyed Safety Switches

Altech Keyed Solenoid Locking Switches

Altech Hinged Safety Switches

Altech Smart and Non-Contact Safety Swtiches

Altech Plastic and Metal Limit Switches

Altech Cylinder and Capacitive Proximity Switches

Altech Flat Pack and Ring Proximity Switches

Altech Metal Detection Switches

Altech Push-In Terminal Blocks

Altech Screw Clamp Terminal Blocks

Altech Spring Clamp Terminal Blocks

Altech Ring and Lug Terminal Blocks

Altech Mini and Panel mount Terminal Blocks

Altech Eurostrips

Altech PCB Terminal Blocks

Altech Marking Tags and Marking Systems

Altech Liquid Tight Strain Relief

Altech Ferrules and Tools

Altech Wire Duct

Altech Tower Lights

Altech Test and Measurement

Altech ATEX Products

For a Quote, Contact us HERE!

Sords Electric

Cleveland, Ohio

216-765-4230

www.sordselectric.com

Southwire Eletrical Assembled Products

 Southwire Assembled Products from Sords Electric

For a Quote, Please contact us HERE!

Ground Fault Circuit Interrupters, GFCI, Extension Cords, Surge Strips, Work lights, construction lighting, portable lighting, Timing devices, Power distribution Boxes, Wire, Spot Lights, ELCIs, Personnel Protection

                                                         Southwire

For a Quote or information, Please contact us HERE!

Sords Electric
216-765-4230
www.sordselectric.com

ATC 400 INTERVAL SPRING WOUND TIMERS

ATC Analog Spring Wound Interval Timers from Sords Electric
Series 406A, 407A and 409A timers by Automatic Timing and Controls

The pointer is manually set to the desired time. At the instant the knob is turned from zero, the switch MS closes and load A is energized. After the set time has elapsed, the load is de-energized and the timer stops at zero.

There is a terminal connection, (terminal 4) load B, for an end of cycle light and/or audible signal. A toggle switch can be furnished as added equipment which allows setting of the time before actuating the load. This provides a means of more accurate time settings. This toggle switch (time start and signal stop) will also turn off the end of cycle signal.

APPLICATIONS: Designed to control an electrical circuit for a set time upon operation of the manual setting knob which is directly connected to the switch operating cam. To assure positive setting action, this timer does not set through a clutch. Calibrated dial settings are available in ranges 30 minutes, 60 minutes and 5 hours. Designed for control of any electrically operated equipment or operation, such as processing machinery, plastic molding, laundry and dry cleaning machinery, electric ovens and furnaces, photographic equipment, lighting, generators, fans or wherever accurately timed control of electrical operation is critical.

ATC 406A Interval Timer with 30 Minute Range, 15 amp contacts and 120v voltage

ATC 407A Interval Timer with 60 Minute Range, 15 amp contacts and 120v voltage

ATC 409A Interval Timer with 5 Hour Range, 15 amp contacts and 120v voltage

An interval timer is like an oven timer, set the time the "oven" goes for the set amount of time and then the "oven" goes off at the elasped time.

Click HERE for the Data Sheet for the ATC 400 Series Spring Wound Timers
Click HERE for the Sords Electric ATC Timer Parts Form for a quote.

800-929-2845
info@sordselectric.com

ATC 422AR Flip Flop Timer

Sords Electric stocks the ATC 422AR Flip Flip Timer

The Automatic Timing and Controls 422AR Flip-Flop timer are available with Repeat Cycle operations. During Repeat Cycle operation the 422AR cycle ON and OFF repeatedly, allowing periodic cycling of a load. Two knobs are available to individually adjust the ON-time and the OFF-time. The 422AR can be configured with either the relay being energized during the first timing period or de-energized during the first timing period.

The 422AR have 6 selectable timing ranges available for both ON-time and OFF-time periods. The ranges are 1 and 10 SEC/MIN/HRS dip switch selectable. Having this flexibility allows for a load to be energized for a brief time over a cycle that lasts up to 10 hours. This is deal for lubrication or other maintenance functins that must occur each shift or day during a plant operation.

The ATC 422AR 1/16 DIN housing is compact, and designed for panel mounting. The timer is mounted in an 8-pin round socket. The front of the 422AR features 2 knobs. One knob is used to set the ON-time and the other knob is used to set the OFF-time for the timer’s cycle. The 422AR is universal powered by 20 to 240 VAC or 12 to 240 VDC
operation voltage.

The output of the ATC 422AR has a DPDT mechanical relay which is rated for 10 amps @ 250 VAC resistive. The 422AR can be ordered in a terminal option which is only available with 5 amp Relay output. The 422′s have individual LED indicators for ON time and OFF time. These LED’s provide a unique and effective method of cycle progress indication.

ATC 422AR Flip Flop TDR

Six Selectable Ranges:
1 and 10 SEC/MIN/HRS
• Individual adjustable ON-time and OFF-time
• Cycle can begin with relay energized or de-energized
• Relay rated 10A @ 250 VAC Resistive
• Compact Size (1/16 DIN)
• DPDT Relay Output
• Power: 20VAC to 240VAC
12VDC to 240VDC
• LED Indicator for Power and Relay energized output
• Can be DIN Rail mounted with DIN RAIL socket

The 422AR is the third in line of a tradition of unique Flip Flop Timers by ATC. the original 342 Flip Flop Timer set the standard for repeat cycle timers by have individual settable on and off cycles.  The 422 ATC TDR flip flop timer continued the tradition in an 1/8 DIN package.  The current 422AR is in a 1/16 DIN package but retains the features of the family of timers.

Call Sords Electric for more information or to order.
800-929-2845
Our Contact page HERE.

ATC 365 Long Ranger Timer

ATC Automatic timing and Controls 365C Long-Ranger Computing Timer from Sords Electric

Industry standard digital timer

Adjustable range 0.01 sec. to 999 hours

High brightness VF display

High noise immunity

UL recognized

The ATC 365C Timer is microprocessor-based digital timer with three rotary knobs for setting and adjustment of the Preset. The Preset can be any three-digit value from .01 Sec to 999 Hrs. The Decimal and Range are switch selectable. The high-intensity blue vacuum fluorescent display is DIP switch selectable to Timeup or Timedown. Two heavy-duty 7A DPDT relays provide instantaneous, interval or delayed output control. Plug-in panel mounting allows easy replacement without the removal of field wiring.

COMPUTATION: Through its internal microcomputer, the 365C keeps track of the set point throughout the time cycle. Whenever there is a change in set point, even during a cycle, it instantly re-computes the time remaining and accurately determines time-out. This unique capability is especially valuable in the time-down modes as it allows you to shorten a cycle without loss of accuracy.

POSITIVE RESET TIME AND PULSE LENGTH: Digitally clocked by the microcomputer, the 365C’s reset time is consistently of the same duration, regardless of variations in line voltage, power supply or time cycle. As a result, the 365C is not subject to false reset from momentary power interruptions (less than 30 ms). When the 365C operates in repeat-cycle mode, the output pulse is also digitally clocked so that both its occurrence and duration are consistent.

WIDE RANGE: Each 365C Long-Ranger covers the overall span of 0.01 sec. to 999 hrs., in nine switch-selected ranges of 0 to 9.99,99.9 or 999 sec., min. or hrs. The timer can be optimized within any selected range simply by removing appropriate selector knobs (e.g. with the timer in the 9.99 sec. range, you can obtain a tamper-proof span of 0.99 by setting the left selector at 0 and removing the knob).

PROGRAMMABLE DISPLAY: Depending on the position of an internal jumper, the 365C’s three-digit cycle progress display will time UP to or DOWN from the set point; after time-out, it will either STOP or GO (i.e. display the time elapsed after time-out). To the right of the three-digit display, a timing bar “–” blinks once per second during the timing cycle and rapidly after time-out. At left, a marker “∇” turns on when the delayed relay is energized. The 365C is also available without display but with a pilot light that blinks once per second during the cycle and rapidly after time-out.

NOISE IMMUNITY: The 365C has formidable defenses against noise: transformer power supply, full-wave bridges, buffered logic. Furthermore its microcomputer detects; and rejects; noise pulses that manage to penetrate its defenses. No industrial timer has ever offered greater noise immunity.

RELIABILITY AND RUGGEDNESS: ATC firmly believes that no industrial timer has ever achieved a higher level of reliability and ruggedness. The 365C’s electronic components have no moving parts and are assembled, virtually without hand wiring, from computer-tested circuit boards. Its few mechanical components have been selected for reliable service; the two load relays have a life expectancy of 100,000,000 operations and heavy-duty contacts rated at 7 amps; and the three rotary set point selector switches exhibit extremely low wear.

COMPACT, PLUG-IN AND DUST-TIGHT: Packaged in a 72mm2 DIN housing, the 365C occupies 40% less panel space than conventional timers. It is a true plug-in timer that can be replaced in seconds without disturbing housing or wiring. The 365C is also fully gasketed and O-ring sealed to be dust and water-tight.

SELF DIAGNOSTICS: The time will display “FAIL” anytime there is a problem or the knobs are in between digits.

ATC 365 DIGITAL PLUG IN TIMER, 120 VAC, 0-999 hours

ATC 365 DIGITAL PLUG IN TIMER, 240 VAC, 0-999 hours

ATC 365 DIGITAL PLUG IN TIMER, 120 VAC, 0-999 hours w/Memory

www.sordselectric.com

800-929-2845

Carlo Gavazzi Timers

Sords Electric provides Carlo Gavazzi  timers.

Carlo Gavazzi offers a comprehensive range of timers for mounting in the back of or for mounting on the front of panels. We offer a number of different housing types with either a SPDT or DPDT relay output. Covering most timing functions (On Delay, Interval, Off Delay, One Shot, Zero Speed, Star-Delta, and Recycler), our timers are suited for practically every application.

Timers are frequently used in motor control centers, packaging machinery, HVAC equipment, control panels, and process control.

Delay on Operate Timers type DAA01 and PAA01 models.

Multi-voltage delay on operate timer with 7 selectable time ranges within 0.1 s and 100 h. For mounting on DIN- rail (DAA01) or plug-in (PAA01).

Time range 0.1 s to 100 h

Knob selection of time range

Knob adjustable time setting

Automatic start

Repeatability: ≤ 0.2%

Output: 8 A SPDT or 2 x 8 A SPDT relays

For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in

22.5 Euronorm or 36 mm plug-in module housing

Combined AC and DC power supply

LED indication for relay status and power supply ON

DAA01CM24

PAA01CM24

DAA01DM24

PAA01DM24

Multifunction Timers Types DMB01, PMB01

Multi-voltage timer with 7 knob selectable functions  and 7 knob selectable time ranges within 0.1s and 100h. For mounting on DIN-rail (DMB01) or Plug-in(PMB01).

Time range 0.1 s to 100 h

7 knob selectable functions:

Op - delay on operate

In - Interval

Io - Interval on Trigger operate

Id - Double Interval

Dr - delay on release

R - Symmetrical recycler ON First (flasher)

Rb - Symmetrical recycler OFF first (flasher)

Knob selection of time range

Knob-adjustable time setting

Automatic or manual start

Repeatability: ≤ 0.2%

Output: 8 A SPDT or 8 A DPDT relay

For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in

22.5 mm Euronorm or 36 mm Plug-in module housing

Combined AC and DC power supply

LED indication for relay status and power supply ON

DMB01CM24

PMB01CM24

DMB01DM24

PMB01DM24

www.sordselectric.com

800-929-2845

ATC Diversified Electronics Timers

Sords Electric sells Diversified Products, Timers, Voltage monitors, current monitors, time delay relays,  alternating relays, pump controls, and Power Alerts.

For more than 50 years, the ATC Diversified Electronics division of Marsh Bellofram (ATC Diversified) has offered some of the industry’s highest reliability AC current monitors, motor and pump protection, isolated switches and alternating relay products.

As a leader in solid state control products, the division was the industry pioneer in the first Phase Monitor Relay designed to protect 3-phase equipment from adverse conditions such as Phase Loss (single phasing), Under Voltage (brown-outs), and Phase Reversal (improper sequence). Continued investment in new product R&D and continuous quality improvements allows the ATC Diversified team to offer market-leading technologies, keeping pace with the needs of an evolving industrial marketplace.

Diversified Timers are Available in DIP switch selectable socket mount (plug-in) or DIN-rail mounted versions, Marsh Bellofram time delay relays (also known as TDRs or timers) are used to equip industrial machinery, conveyor belts, exhaust fans, heating systems, lubricators, and pump and motor controls with timed sequence delay, soft-start delay or auto-start functions for added machinery and equipment protection.

The TBD Series from the ATC Diversified Electronics division of Marsh Bellofram is a family of rugged, high-reliability off-delay DIP switch time delay relays (TDRs), designed to equip industrial machinery, conveyor belts, exhaust fans, heating systems, lubricators, and pump and motor controls with timed sequence delay, soft-start delay or auto-start functions for added machinery and equipment protection. Supply voltage is continuously applied to the input. An external isolated switch between pins 5 and 6 controls the timer. When closed, the relay energizes. Opening the switch initiates the delay period. Upon completion of the delay period, the relay de-energizes. If the control switch recloses during the delay period, the relay remains energized and the timer resets to zero. NOTE: The TBD series is available in 8-pin SPDT and 11-pin DPDT configurations.

• Off-delay time set with DIP switches
• Available models from 0.1 seconds to 1,023 minutes
• LED glows when relay is energized
• High repeatability and accuracy

The Diversified TBF Flip Flop timer or Recycle timer turns a load on and off indefinately.  When supply voltage is applied to the input, the OFF time (T1) begins. Upon completion of the OFF time, the relay energizes and the ON time (T2) begins. Upon completion of the ON time, the relay de-energizes and one cycle is complete. This OFF/ON cycling continues until supply voltage is removed from the input. The OFF/ON time periods are independently selectable within the same range. The OFF time is first on the TBF model.

DIP Switch Operation: Digital selection of the time delay is accomplished by the use of ten (10) binary switches, each marked with a time increment. The time periods, of which there are five (5) ranges, represented by each switch in the ON position is added together to obtain the desired time delay. No more trial-by-error adjustments.

TBG Series Repeat Cycle-ON Time First DIP Switch TDR.  The TBG is the same as the TBF but the ON time is first.

TBF24ADA    .1 minute (6 seconds) to 102.3 minutes  24 ac/dc    off timer first
TBF120ADA  .1 minute (6 seconds) to 102.3 minutes  120 ac/dc  off time first
TBF24AEA    1 minute to 1023 minutes (17 hours)  24 ac/dc     off time first
TBF120AEA  1 minute to 1023 minutes (17 hours)  120 ac/dc    off time first
TBG24ADA    .1 minute (6 seconds) to 102.3 minutes  24 ac/dc     on time first
TBG120ADA   .1 minute (6 seconds) to 102.3 minutes  120 ac/dc  on time first
TBG24AEA     1 minute to 1023 minutes (17 hours)  24 ac/dc    on time first
TBG120AEA   1 minute to 1023 minutes (17 hours)  24 ac/dc    on time first

The Diversified TBU Series offers the accuracy of DIP SWITCH delay ranges “A” through “E” as well as the user programmable model, DIP SWITCH delay range “P,” with 4 different ranges obtainable by either leaving 2 designated terminals unconnected or by connecting them to the appropriate terminals. The 6 most common modes of operation are easily selected by the use of one or more jumpers applied externally between designated base pins as outlined below. These features, coupled with 6 most popular supply voltages, make this timer one of the most versatile and cost effective Time Delay Relays available today. The CMOS digital circuitry provides high accuracy, repeatability and fast reset times.

TBU12DPA  12vdc
TBU24APA  24 ac/dc
TBU120APA  120 ac/dc
TBU240APA  240 ac/dc

The Diversified TDU Series is one of the most versatile single timers available today. One model replaces forty-eight industry standard devices; 4 wide delay ranges x 6 most common modes of operation x 2 supply voltages—since they will operate on both AC and DC. The CMOS digital circuitry provides high accuracy, repeatability and fast reset times. The heavy duty relays are rated for continuous operation at 10 amps. All programming is easily accomplished externally by using one or more jumpers between designated base pins—no trap doors to open, no switches to set, no disassembly required.
 
TDU12DKA    12 vdc
TDU24AKA    24 ac/dc
TDU120AKA  120 ac/dc
TDU240AKA  240 ac/dc

The TDC/TUC series from the ATC Diversified Electronics division of Marsh Bellofram is a family of rugged, high-reliability ON-delay relay outputs, designed to equip industrial machinery, conveyor belts, exhaust fans, heating systems, lubricators, and pump and motor controls with timed sequence delay, soft-start delay or auto-start functions for added machinery and equipment protection. The time delay begins when power is applied to the input. Upon completion of the delay period, the relay energizes. Reset during or after the delay period is accomplished by removal of the input voltage. The TDC/TUC will not false transfer if voltage is removed prior to completion of the delay period. A fast recycle time permits accurate, high speed, continuous operation.


www.sordselectric.com
216-765-4230

Home Safety Electrical Kits

Electrical Safety kits for home use available at Sords Electric

Kits include:


Surge Adapter - 750 Joules

Features:

• 3 outlet surge protector
• 750 joules
• Surge protection indicator
• Sliding safety covers
• EMI / RFI noise filtration
• $100,000 connected equipment warranty

Indoor 7-Day Heavy Duty Mechanical Timer-3 prong

Features:

• Up to 6 on/off settings per day, repeats weekly
• Programmable in 2 hour intervals
• 3-conductor outlet and plug
• Never lose pins cannot be removed or lost
• Instruction slot and manual override switch

Ratings:

• 125V ac, 60 Hz
• 15 Amp, 1875 Watt Resistive
• 8 Amp, 1000 Watt Tungsten
• 5 Amp Ballast
• CSA Certified C/US

GFCI - Ground Fault Circuit Interrupters

Ratings:

• Trip level: 4-6 mA 
• Nominal operating voltage: 120 VAC 50/60 Hz
• Maximum operating current: 15A
• GFCI reset: Manual
• Surge protection (L-N): 205 Joules

The Fire Shield Surge Strips are the only power strips with built-in intelligence to prevent cord fires, surges and overloads.

World's safest surge strips Built-in cord fire protection Specially shielded conductors UL listed and CSA approved Fire Shield technology is designed and engineered in the U.S.A. One year guarantee

1350 Joules $25,000 Connected Equipment Warranty 3 Foot Cord 6-Outlet

Electra Check Digital Monitor

• ▪ Fully tests incoming power for:
• Open ground
• Reverse polarity
• High/Low voltage

• Three display modes available:
• Alternating voltage and frequency (VOLT/FREQ.)
• Voltage only (VOLTAGE)
• Frequency only (FREQUENCY

Voltage Range 85 to 150 Vac RMS

Frequency Range 40/80Hz

Operating Current  0.02 Amp 

Under Voltage Alarm  <102 rms="rms" span="span" vac="vac">

Over Voltage Alarm  >135 Vac RMS

Under Frequency Alarm  <55 hz="hz" span="span">

Over Frequency Alarm  >65 Hz 

Outlet Type  120V/15A single phase 

Operating temperature  +32 ̊F to +125 ̊F

Shock Shield GFCI Tester

􏰀 Volts/Amps: 120V/15A 

􏰀 Wiring Diagnostics - Checks Line Neutral and Ground Wire Integrity

􏰀 GFCI Tester - Inspects for proper operation and nuisance tripping.

        Separate tests for a 6mA ground fault and a 3mA ground fault 

􏰀 Power Quality Monitor (PQM) - Identifies excessive voltage drop (approx. 6V) on the

       branch circuit by measuring the voltage between neutral and ground

LCDI Protected
Safety Extension Cords

125V/13A & 125V/15A

World's safest extension cord

Built-in cord fire protection

Specially shielded conductors

Fire Shield technology is designed and engineered in the U.S.A.

UL listed and CSA certified

One year guarantee

 Electrical fires kill over 750 people and cause over $1 billion in property damage annually.  Extension cords have been identified by the US Consumer Product Safety Commission as a leading cause of electrical fires in the home.  Every six minutes there is an extension cord-related electrical fire in the US.

The Fire Shield Safety Extension Cord is the world's only power cord which can shut off power when a dangerous electrical condition or potential fire hazard is detected.  Built-in electronic circuitry continuously monitors the condition of the cord and shuts off power in just 25/1000's of a second if there is any damage or wear that can lead to combustion, before the fire can occur.

GFCI - with 6 foot cord and Quad Box - 15 amps, 120 volts - Auto Reset
For Residential use

                                                              Ratings:

Cord type: 2/3 SJTW 

Cord length: 6 ft.

Cord color: Yellow

Attachment plug configuration: NEMA L5-15P

Attachment plug color: Yellow

Receptacle configuration: NEMA 5-15R x 4

Housing material: ABS

Housing color: Yellow 

Receptacle protection: Spring-loaded cover provides protection when

not in use; sloping top repels rain

Temperature rating: -30 to +60 oC

Operating environment: Outdoor, if protected from water entry

Nominal operating voltage: 120VAC/60Hz

Maximum operating current: 15 A 

Maximum operating wattage: 2400 W

GFCI - with 25 foot cord and Quad Box - 15 amps, 120 volts - Manual Reset
For Contractor Use

In-Line GFCI Protected Quad Boxes:

Box enclosed in heavy impact resistant polymer case. Spring loaded covers protect each pair of receptacles. “Fast Breaker” built in for convenient reset. GFCI with lighted indicator located at power end provides protection to the cord and tools attached. 

Ratings:

􏰀 Volts/Amps: 120V/15A 

􏰀 Cord Gauge: 12/3 AWG 

􏰀 NEMA 5-15P & (4)5-15R 

􏰀TripLevel: 4-6mA

Trip response time for ground fault

     and grounded neutral trip is less than 25mS

Voltage surge withstand is 3kv ringwave test and 4kv/2kA surge immunity test

Radio frequency noise susceptibility is operates within normal limits with 0.5 volts injected on power line 150kHz-230mHz

Endurance is 3,000 operations minimum

Overload Current is six times rated current

Operating temperature range is -35 ̊C to 66 ̊C

Effect of 10 Amp turn DC Shock

     on ground fault trip is 5% maximum trip level variation

Insulation voltage is 1500 VRMS - 1 Min.