Home Safety Electrical Kits

Electrical Safety kits for home use available at Sords Electric

Kits include:


Surge Adapter - 750 Joules

Features:

• 3 outlet surge protector
• 750 joules
• Surge protection indicator
• Sliding safety covers
• EMI / RFI noise filtration
• $100,000 connected equipment warranty

Indoor 7-Day Heavy Duty Mechanical Timer-3 prong

Features:

• Up to 6 on/off settings per day, repeats weekly
• Programmable in 2 hour intervals
• 3-conductor outlet and plug
• Never lose pins cannot be removed or lost
• Instruction slot and manual override switch

Ratings:

• 125V ac, 60 Hz
• 15 Amp, 1875 Watt Resistive
• 8 Amp, 1000 Watt Tungsten
• 5 Amp Ballast
• CSA Certified C/US

GFCI - Ground Fault Circuit Interrupters

Ratings:

• Trip level: 4-6 mA 
• Nominal operating voltage: 120 VAC 50/60 Hz
• Maximum operating current: 15A
• GFCI reset: Manual
• Surge protection (L-N): 205 Joules

The Fire Shield Surge Strips are the only power strips with built-in intelligence to prevent cord fires, surges and overloads.

World's safest surge strips Built-in cord fire protection Specially shielded conductors UL listed and CSA approved Fire Shield technology is designed and engineered in the U.S.A. One year guarantee

1350 Joules $25,000 Connected Equipment Warranty 3 Foot Cord 6-Outlet

Electra Check Digital Monitor

• ▪ Fully tests incoming power for:
• Open ground
• Reverse polarity
• High/Low voltage

• Three display modes available:
• Alternating voltage and frequency (VOLT/FREQ.)
• Voltage only (VOLTAGE)
• Frequency only (FREQUENCY

Voltage Range 85 to 150 Vac RMS

Frequency Range 40/80Hz

Operating Current  0.02 Amp 

Under Voltage Alarm  <102 rms="rms" span="span" vac="vac">

Over Voltage Alarm  >135 Vac RMS

Under Frequency Alarm  <55 hz="hz" span="span">

Over Frequency Alarm  >65 Hz 

Outlet Type  120V/15A single phase 

Operating temperature  +32 ̊F to +125 ̊F

Shock Shield GFCI Tester

􏰀 Volts/Amps: 120V/15A 

􏰀 Wiring Diagnostics - Checks Line Neutral and Ground Wire Integrity

􏰀 GFCI Tester - Inspects for proper operation and nuisance tripping.

        Separate tests for a 6mA ground fault and a 3mA ground fault 

􏰀 Power Quality Monitor (PQM) - Identifies excessive voltage drop (approx. 6V) on the

       branch circuit by measuring the voltage between neutral and ground

LCDI Protected
Safety Extension Cords

125V/13A & 125V/15A

World's safest extension cord

Built-in cord fire protection

Specially shielded conductors

Fire Shield technology is designed and engineered in the U.S.A.

UL listed and CSA certified

One year guarantee

 Electrical fires kill over 750 people and cause over $1 billion in property damage annually.  Extension cords have been identified by the US Consumer Product Safety Commission as a leading cause of electrical fires in the home.  Every six minutes there is an extension cord-related electrical fire in the US.

The Fire Shield Safety Extension Cord is the world's only power cord which can shut off power when a dangerous electrical condition or potential fire hazard is detected.  Built-in electronic circuitry continuously monitors the condition of the cord and shuts off power in just 25/1000's of a second if there is any damage or wear that can lead to combustion, before the fire can occur.

GFCI - with 6 foot cord and Quad Box - 15 amps, 120 volts - Auto Reset
For Residential use

                                                              Ratings:

Cord type: 2/3 SJTW 

Cord length: 6 ft.

Cord color: Yellow

Attachment plug configuration: NEMA L5-15P

Attachment plug color: Yellow

Receptacle configuration: NEMA 5-15R x 4

Housing material: ABS

Housing color: Yellow 

Receptacle protection: Spring-loaded cover provides protection when

not in use; sloping top repels rain

Temperature rating: -30 to +60 oC

Operating environment: Outdoor, if protected from water entry

Nominal operating voltage: 120VAC/60Hz

Maximum operating current: 15 A 

Maximum operating wattage: 2400 W

GFCI - with 25 foot cord and Quad Box - 15 amps, 120 volts - Manual Reset
For Contractor Use

In-Line GFCI Protected Quad Boxes:

Box enclosed in heavy impact resistant polymer case. Spring loaded covers protect each pair of receptacles. “Fast Breaker” built in for convenient reset. GFCI with lighted indicator located at power end provides protection to the cord and tools attached. 

Ratings:

􏰀 Volts/Amps: 120V/15A 

􏰀 Cord Gauge: 12/3 AWG 

􏰀 NEMA 5-15P & (4)5-15R 

􏰀TripLevel: 4-6mA

Trip response time for ground fault

     and grounded neutral trip is less than 25mS

Voltage surge withstand is 3kv ringwave test and 4kv/2kA surge immunity test

Radio frequency noise susceptibility is operates within normal limits with 0.5 volts injected on power line 150kHz-230mHz

Endurance is 3,000 operations minimum

Overload Current is six times rated current

Operating temperature range is -35 ̊C to 66 ̊C

Effect of 10 Amp turn DC Shock

     on ground fault trip is 5% maximum trip level variation

Insulation voltage is 1500 VRMS - 1 Min.

Fire Shield Surge Strips for College Students

Fire Shield is a next generation extension cord with built-in intelligence to sense cord damage and shut off the power before a fire can start. No other extension cord has this capability.

Industry statistics indicate there is a cord fire approximately every 6 minutes. The most frequent causes of such fires are short circuits, overloading, damage, and/or misuse of extension cords.

A special shield surrounds each of the insulated conductors of the Fire Shield Extension Cord. The shield is continuously monitored by electronics in the plug head. When a dangerous electrical condition is detected by current leaking to the shield, power is shut off before a fire can start.

Fire Shield differ from GFCI's and ground conductors. Grounded conductors only provide a path to ground. GFCI’s detect ground faults. Neither detects the breakdown in the insulation of a standard extension cord, which can lead to an arcing condition that may start a fire. By utilizing a sensing shield around the insulated Fire Shield conductors combined with intelligent electronics in the plug head, Fire Shield can detect damage in the cord such as series faults (broken and frayed conductors) and parallel faults (insulation damage between the live conductors), and shut off the power before a fire can start.

Unintentional misuse of extension cords is the main reason for cord fires. Cords may be crimped, pinched, frayed, overloaded, overheated, or just worn out. Any of these conditions can lead to an extension cord fire. Fire Shield can detect any leakage currents from these conditions and shut off power before a fire can occur.

The cord fire protection is a function of the special shield and relates to the Fire Shield extension cord only.

Fire Shiled should be used anywhere you use standard extension cords or power strips; in children’s rooms, pet areas, with space heaters, electric blankets, waterbeds, etc. Children and pets have been known to bite or chew electrical cords. Fire Shield, with its built-in intelligence may provide protection in these circumstances. Fire Shield Safety Extension Cords should also be used during the holidays with Christmas trees and other holiday decorations because of the tendency to overload extension cords.

Standard surge protectors only provide protection against power surges, which is important. However, standard surge protectors do not provide cord fire prevention. TRC has recently introduced a next generation line of Fire Shield Surge Protectors that not only protects against power surges, but also provides cord fire prevention.

Fire Shield cords are now required at many collegesas the only power strip allowed in college dorms. This is due to students overloading the strips, or tacking the cords to walls or pinching the cords between doors or around corners. All these issues can and will cause fires.

Fire Shield cords are patented and UL/CSA approved.

Sords Electric

Facebook