Saturday, April 2, 2016

ATC 400 INTERVAL SPRING WOUND TIMERS

ATC Analog Spring Wound Interval Timers from Sords Electric
Series 406A, 407A and 409A timers by Automatic Timing and Controls



The pointer is manually set to the desired time. At the instant the knob is turned from zero, the switch MS closes and load A is energized. After the set time has elapsed, the load is de-energized and the timer stops at zero.
There is a terminal connection, (terminal 4) load B, for an end of cycle light and/or audible signal. A toggle switch can be furnished as added equipment which allows setting of the time before actuating the load. This provides a means of more accurate time settings. This toggle switch (time start and signal stop) will also turn off the end of cycle signal.

APPLICATIONS: Designed to control an electrical circuit for a set time upon operation of the manual setting knob which is directly connected to the switch operating cam. To assure positive setting action, this timer does not set through a clutch. Calibrated dial settings are available in ranges 30 minutes, 60 minutes and 5 hours. Designed for control of any electrically operated equipment or operation, such as processing machinery, plastic molding, laundry and dry cleaning machinery, electric ovens and furnaces, photographic equipment, lighting, generators, fans or wherever accurately timed control of electrical operation is critical.




















ATC 406A Interval Timer with 30 Minute Range, 15 amp contacts and 120v voltage

ATC 407A Interval Timer with 60 Minute Range, 15 amp contacts and 120v voltage

ATC 409A Interval Timer with 5 Hour Range, 15 amp contacts and 120v voltage

An interval timer is like an oven timer, set the time the "oven" goes for the set amount of time and then the "oven" goes off at the elasped time.

Click HERE for the Data Sheet for the ATC 400 Series Spring Wound Timers
Click HERE for the Sords Electric ATC Timer Parts Form for a quote.

800-929-2845
info@sordselectric.com



No comments:

Post a Comment