Diversified Electronics TSF Solid State Repeat Cycle Timer

Sords Electric Sells the TSF Repeat Cycle Timer (Off time first) by Diversified.

For a Quote, please click HERE!

About the TSF Repeat Cycle-OFF Time First Solid-State Output Timer from ATC Diversified Electronics:

Application of voltage to the input of the timer initiates the OFF time. Upon completion of the OFF time, the load energizes and the ON time begins. Upon completion of the ON time, the load de-energizes and one cycle is completed. This OFF/ON cycling continues until voltage is removed from the input. The OFF/ON time periods are independently adjustable. 

Features:

• Voltage to input initiates the off time
• OFF/ON times independently adjustable

Diversified / ATC TSF
Repeat Cycle Timer
Off Time first

OPERATION: Application of voltage to the input of the timer initiates the OFF time. Upon completion of the OFF time, the load energizes and the ON time begins. Upon completion of the ON time, the load de-energizes and one cycle is completed. This OFF/ON cycling continues until voltage is removed from the input. The OFF/ON time periods are independently adjustable.

Solid-state, SPST-N.O. 

1 amp resistive; RATING 

1 amp 25VA @ 24VAC 

1 amp 125VA @ 120VAC 

 .5 amp 125VA @ 240 VAC

Part Numbers

TSF24AFC, 24 volts, fixed Timing

TSF120AFC, 120 volts, fixed timing

TSF240AFC, 240 volts, fixed timing

TSF24ARC, 24 volts, Adjustable Timing

TSF120ARC, 120 volts, Adjustable timing

TSF240ARC, 240 volts, Adjustable timing

For a Quote, please click HERE!

Sords Electric

216-765-4230

www.sordselectric.com

Sords Electric SSAC Over Stock Timing Devices

By Sords Electric

Solid State Advanced Control Timers Over Stock at Sords Electric

SSAC was also known as Entrelec, ABB, Sycom and now Littlefuse

For a Quote, Please use our SSAC/Littelfuse Parts Form HERE!


SSAC FS146 Flasher 75 Flashes per Minute, 1 Amp

SSAC FS 146 Flasher

SSAC KSDB321P 1-100 Second Timer, 1 amp

SSAC 2x2 Timer - 100 seconds

SSAC FS152-50 Flasher 50 Flashes per Minute, 3 amps, 30 amps Inrush

SSAC Flasher FS152-50

SSAC FS152 Flasher 90 Flashes per Minute 3 amps and 30 maps Inrush

SSAC FS 152 Flasher

SSAC KSDS4110M 10 minute timer, 1 amp and 10 amps Inrush

SSAC 2x2 10 minute timer

SSAC KSDR40A0 Adjustable timer .1 - 10 seconds and 2 delays 1 amp

SSAC 2x2 10 second Timer

SSAC TRDU120A2 Universal TDR

SSAC Octal Socket TDR

SSAC TDBL12D TDR 12 vdc 102 seconds adjustable

SSAC Delay on Break TDR

These parts and new and unused.

For a Quote, Please use our SSAC/Littelfuse Parts Form HERE!

Sords Electric
CONTACT US

Solid State Advanced Control (SSAC) Timers made by Littelfuse

ATC 175MU Industrial Timer

Sords Electric Sells the ATC 175MU Din Rail Multifunction Timer

The Automatic Timing and Controls 175MU DIN Rail Mont MultiFunction Timer offers a universal supply voltage or 20-240 VAC (50/60) and 12-240 VDC along with 13 unique functions and 10 timing ranges with a single unit. The ATC 175MU features a slim, space saving design.  The ATC 175MU can be used in new applications as well as a drop in replacement for most DIN rail 17.5 mm industrial timers. The Multifunctionality allows a reduction of inventory. The low cost compact timer comes in a standard 17.5mm  DIN rial package with a 5 amp SPDT relay output contact configuration and user selectable time ranges, from .1 second up to 3 hours.  The ATC 175 MU is easily configured via its front knobs for time range, time scale and mode setting.  UL and CE listed and certified.

ATC 175MU Multi-Function DIN Rail Timer

Get PDF HERE!

Features

13 Functions
10 Timing Ranges
Front Panel Knobs
Slim 17.5 mm design
20-240 volts AC/DC
12-240 VDC Supply

Applications

EM Equipment
Packaging and plastic machinery
Machinery Control
Materials Handling
Conveyors system control
Motors and Pumps
Process related applications

Modes

On Delay
Interval
Recycle OFF time first
Recycle ON time first
Pulse Output, 500 ms
Delay on Break
Delay on Make
Interval after Break
Single Shot
Retriggerable Single Shot
Latching Relay
Delay with Totalize
Interval with Totalize

Time Ranges

.1-1 second, .3-3 Seconds, 1-10 Seconds, 3-30 Seconds, .1-1 Minute, .3-3 Minutes, 1-10 Minutes, 3-30 Minutes, .1-1 Hour and .3-3 Hours


ATC 175MU Multi-Function DIN Rail Timer


Sords Electric
216-765-4230
www.sordselectric.com

ATC 339 Timer Delay Relay

Sords Electric Stock the Automatic Timing FM approved 339B TDR

An economical solid-state TDR with octal plug-in base, the 339 maintains excellent repeat accuracy despite wide voltage and temperature varia- tions. even after long periods of down-time. Two models are available. Each has six dial selected ranges from fractions of a second to as long as 10 hours. Each model has a selectable on-delay or interval timing mode.

WIDE CHOICE OF RANGES: In addition to the short ranges expected of an electronic TDR, the 339 is also available with ranges as long as 10 hours. An unusually versatile timer, the 339A has six dial-selected ranges—from 0.3 SEC to 3 hours or 1 SEC to 10 hours—and provides dial-adjustable timing periods between 0.075 seconds and 10 hours. A single 339 model thus accommodates the needs of a wide range of appli- cations, allowing the user to select easily and precisely—an appropriate range to permit optimum setting accuracy. The dial face automatically dis- plays the selected range.

CYCLE PROGRESS INDICATION: The 339’s LED annunciator provides a unique and effective method of cycle progress indication. Off before timing, the LED blinks at an ever-increasing rate as the cycle progresses; once every 3-1/2 seconds during the first 10% of the cycle, twice during the second 10%, and so on. At time-out, the LED stays on constantly, pulsing at a high rate. (In the 1 and 10 second ranges, the LED is off before timing, steady on during timing, and pulsing on after time-out.) 

HIGH ACCURACY: The 339’s timing circuit is not a simple RC circuit, but utilizes the sophistication of a proprietary integrated circuit that includes counting technology along with a stable oscillator to provide repeatable time delays.

MULTIPLE TIMING MODES: Every 339 can be used for either ON- delay or interval timing operation. The timing mode is selectable by a switch on the 339 housing.

The ATC 339B is FM approved or Factory Mutual for use with combustion systems.  Usually used as a purge timer.

ATC 339B359Q2X
Six ranges, .3 or 3 Seconds, Minutes or Hours
120/60 voltage, 8 pin Octal Socket, Factory Mutual Approved-FM

ATC 339B200Q2X
Six ranges,  1 or 10 Seconds, Minutes or Hours
120/60 voltage, 8 pin Octal Socket, Factory Mutual Approved-FM

The ATC 339B Time delay relay can be ordered as well with 240 volts AC, 24 ACDC or 12 VDC

339B359R2X - 240 VAC
339B359T2X - 24 volts AC/DC
339B359E2X - 12 vdc

339B200R2X - 240 VAC
339B200T2X - 24 volts AC/DC
339B200E2X - 12 VDC




Sords Electric
216-765-4230
www.sordselectric.com

Carlo Gavazzi DMB MultiFunction Timer

Carlo Gavazzi DIN Rail Mount Industrial Timer from Sords Electric

The Carlo Gavazzi Timer  is Multi-voltage timer with 7 knob-selectable functions and 7 knob-selectable time ranges within 0.1s and 100h. For mounting on DIN-rail. Housing 17.5 mm wide for SPDT version and 35.5 mm for DPDT version, suitable both for back and front panel mounting. Wide power supply range: 24VDC and 24 to 240VAC or 12 to 240 VAC/DC.

DMB 51 C W24 - Carlo Gavazzi DMB51CW24 12-240 VAC/VDC
DMB 51 C M24 - Carlo Gavazzi DMB51CM24 24 vdc and 24-240 VAC

DMB 71 D W24 - Carlo Gavazzi DMB71CW24 12-240 VAC/VDC   
DMB 71 D M24 - Carlo Gavazzi DMB71CM24 24 vdc and 24-240 VAC

Carlo Gavazzi DMB 51 is SPDT and Carlo Gavazzi DMB 71 is DPDT

• Selectable time range 0.1 s to 100 h

• 7 knob selectable functions:

  Op - On Delay or delay on operate

  In - Interval

  Io - Interval on trigger pen

  Id - Double Interval

  Dr - Off Delay or delay on release

  R - Symmetrical Recycler ON time first (recycle timer)

  Rb - Symmetrical Recycler OFF time first (recycle timer)

• Automatic or Manual Start
• Repeatability: ≤ 0.2%
• Output: 5 A SPDT or 5 A DPDT relays
• For mounting on DIN-rail in accordance with DIN/EN 50 022 

• 17.5 mm (DMB51C) or 35.5 mm (DMB71D) DIN-rail housing (DIN 43880)
• Combined AC and DC power supply
• LED indication for relay status and power supply ON

Time ranges - Knob selectable

.1 to 1 Second, 1 to 10 seconds, 6 to 60 seconds, 60 to 600 seconds, .1 to 1 hour, 1 to 10 Hours, 10 to 100 Hour

Carlo Gavazzi DMB 51 Timer

Carl Gavazzi DMB 71 Timer

Setting accuracy

<5 font="">

Repeatability

<2 font="">

Contact Ratings (AgSnO2)

DMB51 (SPDT):  

5 amps @ 250 Volts / 5 amps at 24 vdc resistive loads

2.5 amps @ 250 Volts / 2.5 amps at 24 vdc inductive loads

DMB71 (DPDT):

5 amps @ 250 Volts resistive loads

3 amps @ 250 Volts / 3 amps at 24 vdc inductive loads

Yellow LED working mode
Timing: Slow blinking

Relay ON: See operation diagrams

Incorrect knobs position: Fast blinking

UL and CSA Approved Timer

www.sordselectric.com
800.929-2845

ATC 304G Percentage Timer for Industrial Control

Sords Electric Sells the ATC 304G Percentage Timer
Automatic Timing and Controls % Timer Model 304G

Percentage Timers work by turning on a load for a percent of the dial Range.
If you have a 60 second (1 minute) percentage timer and set the dial to 50%, the timer will be on for 30 seconds and of for 30 seconds. If the dial is set to 75% then the load is on for 45 seconds and off for 15 seconds. Percentage timers start their cycling function when the control switch closes. As long sat the switch remains closed, the load continues to turn on and off at regular intervals.  This cycling stops when the control switch is open. A recycle timer is similar and comes in 2 types; equal on and off times and different on and off times also know as a flip flop timer.  A Flip Flop timer can have an ON time in seconds and an off time in Hours or vice versa. See ATC 422AR Flip Flop Timer.

The ATC 304G solid-state percentage timer comes standard in a 120 SEC range with 15 SEC, 30 SEC, 60 SEC user configurable ranges. Additionally, all second ranges can become minute ranges by cutting jumper J0. The 304G is easily panel mounted with 4 screws. It utilizes an integrated circuit technology for high accuracy timing.

CONTACTS: The relay contact is capable of switching 10 A to a resistive 120 VAC or 30 VDC load. It is capable of driving a 1/3 HP load at 120 VAC.

CYCLE PROGRESS INDICATION: The 3O4G has a pilot light that is on solid during the relay off time. It blinks at a faster rate during the relay on time: once every 3.5 seconds during the first 10% of the cycle, twice during the second 10% and so on.

HIGH ACCURACY: The ATC 304G's timing circuit is not a simple RC circuit. It utilizes the sophistication of a proprietary integrated circuit that includes counting technology along with a stable oscillator to provide repeatable time delays.

CONVENIENT ADJUSTMENT: Graduated in easily read 1% increments, the ATC 304G provides continuous adjustment of on time between 5 and 95%.

The ATC 304G comes standard in the 120 SECOND range but is user configurable for the 15 SEC, 30 SEC, 60 SEC by cutting jumpers from the PC board. Each of these ranges can also be made minutes range by cutting a jumper. Its solid-state circuitry repeatedly closes the SPST load switch for a percentage of the time cycle, as set on the timer dial, and opens it for the remainder of the cycle.

When the dial pointer is set below 3%, the load switch stays open for the full cycle; it remains closed when the pointer is set above 98%. This is true for all seconds ranges. Minute ranges have a 0.01% minimum.

If power is interrupted to the 304G percentage timer it will reset. When power is restored, the 304G will begin a new time cycle.

Percentage Timers can control heaters, lights, ovens, heat trace cable, motors, and pumps.

Percentage Timers are found in industrial plants, waste water plants, agriculture processes, irrigation, stadiums and steel processes.

T go to our website and buy the 304G timer click below.
ATC 304G400Q00XX Percentage Timer

To get a quote on any ATC timer, please use our ATC Timer Parts Form HERE.

800-929-2845
info@sordselectric.com

ATC 400 INTERVAL SPRING WOUND TIMERS

ATC Analog Spring Wound Interval Timers from Sords Electric
Series 406A, 407A and 409A timers by Automatic Timing and Controls

The pointer is manually set to the desired time. At the instant the knob is turned from zero, the switch MS closes and load A is energized. After the set time has elapsed, the load is de-energized and the timer stops at zero.

There is a terminal connection, (terminal 4) load B, for an end of cycle light and/or audible signal. A toggle switch can be furnished as added equipment which allows setting of the time before actuating the load. This provides a means of more accurate time settings. This toggle switch (time start and signal stop) will also turn off the end of cycle signal.

APPLICATIONS: Designed to control an electrical circuit for a set time upon operation of the manual setting knob which is directly connected to the switch operating cam. To assure positive setting action, this timer does not set through a clutch. Calibrated dial settings are available in ranges 30 minutes, 60 minutes and 5 hours. Designed for control of any electrically operated equipment or operation, such as processing machinery, plastic molding, laundry and dry cleaning machinery, electric ovens and furnaces, photographic equipment, lighting, generators, fans or wherever accurately timed control of electrical operation is critical.

ATC 406A Interval Timer with 30 Minute Range, 15 amp contacts and 120v voltage

ATC 407A Interval Timer with 60 Minute Range, 15 amp contacts and 120v voltage

ATC 409A Interval Timer with 5 Hour Range, 15 amp contacts and 120v voltage

An interval timer is like an oven timer, set the time the "oven" goes for the set amount of time and then the "oven" goes off at the elasped time.

Click HERE for the Data Sheet for the ATC 400 Series Spring Wound Timers
Click HERE for the Sords Electric ATC Timer Parts Form for a quote.

800-929-2845
info@sordselectric.com