The Carlo Gavazzi Timer is Multi-voltage timer with 7 knob-selectable functions and 7 knob-selectable time ranges within 0.1s and 100h. For mounting on DIN-rail. Housing 17.5 mm wide for SPDT version and 35.5 mm for DPDT version, suitable both for back and front panel mounting. Wide power supply range: 24VDC and 24 to 240VAC or 12 to 240 VAC/DC.
DMB 51 C W24 - Carlo Gavazzi DMB51CW24 12-240 VAC/VDC
DMB 51 C M24 - Carlo Gavazzi DMB51CM24 24 vdc and 24-240 VAC
DMB 51 C M24 - Carlo Gavazzi DMB51CM24 24 vdc and 24-240 VAC
DMB 71 D W24 - Carlo Gavazzi DMB71CW24 12-240 VAC/VDC
DMB 71 D M24 - Carlo Gavazzi DMB71CM24 24 vdc and 24-240 VAC
Carlo Gavazzi DMB 51 is SPDT and Carlo Gavazzi DMB 71 is DPDT
DMB 71 D M24 - Carlo Gavazzi DMB71CM24 24 vdc and 24-240 VAC
Carlo Gavazzi DMB 51 is SPDT and Carlo Gavazzi DMB 71 is DPDT
• Selectable time range 0.1 s to 100 h
• 7 knob selectable functions:
Op - On Delay or delay on operate
In - Interval
Io - Interval on trigger pen
Id - Double Interval
Dr - Off Delay or delay on release
R - Symmetrical Recycler ON time first (recycle timer)
Rb - Symmetrical Recycler OFF time first (recycle timer)
• Automatic or Manual Start
• Repeatability: ≤ 0.2%
• Output: 5 A SPDT or 5 A DPDT relays
• For mounting on DIN-rail in accordance with DIN/EN 50 022
• Repeatability: ≤ 0.2%
• Output: 5 A SPDT or 5 A DPDT relays
• For mounting on DIN-rail in accordance with DIN/EN 50 022
• 17.5 mm (DMB51C) or 35.5 mm (DMB71D) DIN-rail housing (DIN 43880)
• Combined AC and DC power supply
• LED indication for relay status and power supply ON
• Combined AC and DC power supply
• LED indication for relay status and power supply ON
Time ranges - Knob selectable
.1 to 1 Second, 1 to 10 seconds, 6 to 60 seconds, 60 to 600 seconds, .1 to 1 hour, 1 to 10 Hours, 10 to 100 Hour
 |
| Carlo Gavazzi DMB 51 Timer |
 |
| Carl Gavazzi DMB 71 Timer |
Setting accuracy
<5 font="">
Repeatability
<2 font="">
Contact Ratings (AgSnO2)
DMB51 (SPDT):
5 amps @ 250 Volts / 5 amps at 24 vdc resistive loads
2.5 amps @ 250 Volts / 2.5 amps at 24 vdc inductive loads
DMB71 (DPDT):
5 amps @ 250 Volts resistive loads
3 amps @ 250 Volts / 3 amps at 24 vdc inductive loads
Yellow LED working mode
Timing: Slow blinking
Timing: Slow blinking
Relay ON: See operation diagrams
Incorrect knobs position: Fast blinking
UL and CSA Approved Timer
www.sordselectric.com
800.929-2845
No comments:
Post a Comment