SSAC TSDR612SA20S Timing Module

Sords Electric Fixed Time Recycling Timing Module by SSAC

SSAC timer TSDR612SA20S, 230 volts.

This Recycle timer is 2 seconds ON and 20 seconds OFF.

The TSDR Digi-Timer is an on/off or off/on recycling timing module designed to control metering pumps, chemical valves, flash lamps, or use in energy saving or duty cycling applications. It may be ordered with both time delays factory fixed, or one delay fixed and the other delay external or onboard adjustable. The TSD Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is < ±5%. The repeat accuracy, under stable conditions, is 0.5% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 1000 minutes are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.

Operation (Recycling - ON Time First):

Upon application of input voltage, the output energizes and the T1, ON time begins. At the end of the ON time, the output de energizes and the T2, OFF time begins. At the end of the OFF time, the output energizes and the cycle repeats as long as input voltage is applied.

Reset: Removing input voltage resets the output and time delays, and returns the sequence to the T1 ON time. Operation (Recycling - OFF Time First): Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of the T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed.

Reset: Removing input voltage resets the output and the sequence to T2 OFF time.

Timer cost is $35.00 each net.  Call to order.  800-929-2845.

Sords Electric

Carlo Gavazzi Timers

Sords Electric provides Carlo Gavazzi  timers.

Carlo Gavazzi offers a comprehensive range of timers for mounting in the back of or for mounting on the front of panels. We offer a number of different housing types with either a SPDT or DPDT relay output. Covering most timing functions (On Delay, Interval, Off Delay, One Shot, Zero Speed, Star-Delta, and Recycler), our timers are suited for practically every application.

Timers are frequently used in motor control centers, packaging machinery, HVAC equipment, control panels, and process control.

Delay on Operate Timers type DAA01 and PAA01 models.

Multi-voltage delay on operate timer with 7 selectable time ranges within 0.1 s and 100 h. For mounting on DIN- rail (DAA01) or plug-in (PAA01).

Time range 0.1 s to 100 h

Knob selection of time range

Knob adjustable time setting

Automatic start

Repeatability: ≤ 0.2%

Output: 8 A SPDT or 2 x 8 A SPDT relays

For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in

22.5 Euronorm or 36 mm plug-in module housing

Combined AC and DC power supply

LED indication for relay status and power supply ON

DAA01CM24

PAA01CM24

DAA01DM24

PAA01DM24

Multifunction Timers Types DMB01, PMB01

Multi-voltage timer with 7 knob selectable functions  and 7 knob selectable time ranges within 0.1s and 100h. For mounting on DIN-rail (DMB01) or Plug-in(PMB01).

Time range 0.1 s to 100 h

7 knob selectable functions:

Op - delay on operate

In - Interval

Io - Interval on Trigger operate

Id - Double Interval

Dr - delay on release

R - Symmetrical recycler ON First (flasher)

Rb - Symmetrical recycler OFF first (flasher)

Knob selection of time range

Knob-adjustable time setting

Automatic or manual start

Repeatability: ≤ 0.2%

Output: 8 A SPDT or 8 A DPDT relay

For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in

22.5 mm Euronorm or 36 mm Plug-in module housing

Combined AC and DC power supply

LED indication for relay status and power supply ON

DMB01CM24

PMB01CM24

DMB01DM24

PMB01DM24

www.sordselectric.com

800-929-2845

SSAC Timers

SSAC Timers ~ Solid State Advanced Controls

Overview
SSAC designs and

manufactures electronic controls for original equipment

manufacturers: commercial appliances, heating, ventilating, air conditioning and refrigeration

equipment, vending equipment, pumping equipment, elevators, etc.; for process control and

automation designers; obstruction lighting control designers; and for a large group of industrial customers andservice contractors. Sales representatives and stocking distributors are located througho

ut the world.May 31, 2010 SSAC was sold to the shareholders of SymCom Inc. of Rapid City, South Dakota. All the employees were offered positions with the newly formed SSAC LLC. company. Most elected to stay and help SSAC grow within the new privately held structure. Prior History: April 2001, a friendly takeover bid for the Entrelec Group was launched by ABB Inc. This takeover bid was accepted and finalized in June 2001, thereby integrating Entrelec and thus SSAC Inc. into the ABB Group.

An ISO 9001 Company (view ISO certificate)
For more than 30 years, SSAC has achieved new levels of product, quality, and service. Our customers demand quality and they get it. SSAC was the first North American Timers and Controls Company to have an ISO 9001 Registered quality system in place. Our ISO 9001 Quality Management System monitors all aspects of the business process: from the design process to purchasing, incoming material to shipment and customer service. At SSAC we design quality into our products. All of our processes are documented for sustainability and customer satisfaction. Our goal is to make every customer completely satisfied with the best products and services through continuous improvement and employee involvement.

Research and Development The research and development group provides the vehicle for bringing forth new innovative products that meet today's and tomorrow's equipment requirements. It is not enough to provide accurate and stable controls. These controls must address the requirements of the application; this is the only way the target price can be achieved. We offer a wide selection of standard products; and if required, we will develop a product to meet your specific needs. If your need is for one piece or 100,000 pieces, we have the facilities, the equipment, and the people to produce your control when you need it.

Timers and Controls Catalog - SS3
The Largest Selection of Timers and Controls Available
This product selection and application manual provides clear, concise product data and application tips unavailable elsewhere. Double indexing and selection charts for each section speeds product selection. This manual is a must for all control system design engineers.

Products Catalog - Timers and Controls10 Million Timers and Controls Available in 2 Days or Less
SSAC most popular standard products. This 40 page catalog presents 's most popular In Stock & Quickship Timers & Controls; All available from local authorized distributors includi

ng: Time Delay Relays, Encapsulated Timing Modules, Universal Timers, Alternating Relays, Voltage Monitors, Current Sensors and Monitors, Motor Winding Monitors, Liquid Level Controls, Flashers, Tower & Obstruction Lighting Controls, and Accessories. Most of these controls are available for surface and 35 mm DIN rail mounting. The connection options: screw terminals, octal sockets or 0.25 male quick connects, provide solutions for all types of OEM equipment and custom panels.

Application EngineeringSSAC's application engineers offer free assistance in solving all types of control problems. This group has the knowledge and ability to refer to numerous past and present designs, an extensive library of other manufacturer's controls and sensors, along with a working knowledge of many types of equipment and controls. Technical Support

Product Design Experience
SSAC is proud of its wide selection of standard products. These controls satisfy most applications. If you cannot find the exact control for your equipment in this catalog, call our application engineers. We may have already developed a similar custom control. SSAC has over 3,000 custom project numbers on file. The design you require may be a slight modification of an existing desig

n, or a complex development program using a microcomputer.

Complex or simple, SSAC provides the required service. The process starts when you cont

act our application engineering group. After we receive a description of how your equipment must operate, we will process an estimate for design and production. We can design the control with conventional through hole components or with surface mount technology. For most designs, there is no charge for engineering. Free engineering is part of the service we provide.

Quality Program (view ISO certificate)
SSAC's Quality Policy: SSAC's goal is to make every customer completely satisfied with the best products and services through continuous improvement and employee involvement.
We understand the important role played by our Quality Program in making our products dependable, competitive, and responsive to our customer's needs. In order to fully realize our stated Quality Policy, we monitor the Quality of the incoming material, the quality of each step

of the manufacturing process, and we continue to monitor the performance of units after sale and installation.

SSAC Products include:

• Full Line Catalog
• New Products
• Accessories
• Alternating Flashers
• Alternating Relays
• Counters
• Current Sensors
  
• Flashers
• Indicators
• Liquid Level Controls
• Obstruction Lighting Controls
• Phase Controls, AC
• Reactivated Products
• Rev. Phase Monitors, Three Phase
• Sequencing
  
• Solid State Relays
• Temperature Controls
• Timers
• Voltage Monitors