Barksdale ATEX Pressure Switches

Sords Electric Sells Barksdale ATEX certified Presssure Switches

Explosion Proof Compact Switch

Compact Vacuum/Pressure Switches

Series 9671X

Compact explosion proof, from 1 - 30 inches Hg. (Vacuum)

Series 9681X

Compact explosion proof, low pressure from 1 - 500 psi

Series 9692X

Compact explosion proof, high pressure up to 10,000 psi

To Buy, Click HERE!

Barksdale ATEX Pressure Switch - 9671, 9681, 9692 Series

Applications

• BOP closing units
• Safety panels
• Pipelines
• Chemical and petrochemical plants
• Pulp and paper mills
• Pump and gas compressors
• Turbines
• Hazardous location dual seal approved for Canada

Accuracy is +/- 2% full scale

Life is 2.5 millions cycles

Wetted Parts:

Process fitting is 316 Stainless Steel

Seals are Viton and Teflon

Enclosure is 316 Stainless or Aluminum

Electric Connection is 1/2 Male conduit or 18 inch WG leads

Electric Rating is 11 Amps (We go to 11!)

SPDT and DPDT available and GOLD contacts (1amp)

Enclosure rating is NEMA 4X, 7 & 9 SS.  NEMA 4,7 & 9 Aluminum

Ambient Temperature range -4 to 104ºF

EMI/RFI is EN55011

Vibration is 10g's, 10-500 Hz, MIL-STD 202F

Adjustment is Internal with locking screws

Unit Weight is about 2 pounds

Approvals are:

CE 0081, LCIE 08 ATEX 6074X  II 2 G, Ex d IIC T6 Gb IECEx LCIE 17.0001X

UL&CSA Approved for use in hazardous locations Class I,  Groups A,B,C,& D; Class II, Groups E,F,& G (Group A, UL Only)

Barksdale ATEX Pressure switches from vacuum to 15000 PSI (1034 BAR).

To Buy, Click HERE!

Sords Electric
216-765-4230
www.sordselectric.com

Southwire HD-Pro GFCI 60 Amp, 480/3/60, 24672

Sords Electric Sells the TRC HD-PRO ELCI 24672-001-1

The Technology Research HD Pro 24672 High Power ELCI is designed for Motors, pumps, welders, pressure washers, hoists and other high power devices that need GFCI/ELCI protection. The HD Pro 24672 can be configured for inline or bulk head mounting.

Click Link below to order:
TRC HD-PRO 24672-001 60 AMP Adjustable (6/10/30 mA) GFCI / ELCI, 480/3 VAC

The Southwire TRC HDPro 24672-001 has 2 feet of cable on both the line side and the load side. When the mA trip leakage point is reached the unit will trip and require a MANUAL reset.  If the primary power is disrupted the 24672 will reset automatically when power is restored or returns to normal.

Southwire TRC 60 Amp  HD-Pro 24672-001 GFCI ELCI

The TRC HD-Pro Features 

480 volts - Three Phase
60 Amps
4/4 AWG Cord Gauge
Adjustable Trip levels are 6mA, 10mA and 30mA

24672-001 HD-Pro GFCI/ELCI Technical Data

Response Time: 25mS
Frequency: 50/60 Hz
Endurance: 3,000 operations minimum
Overload Current: 6 times rated Current (30 Amps)
Ambient Temperature: -20ºC to +40ºC
Insulation Voltage: 1500 VRMS - 1 minute
Power On Indication: Lighted Indicator
Drop Out Voltage: 60% Rated Voltage (480 v)
Reset Type: Automatic (When primary Power is lost)
Connection Type: Flying Leads
NEMA 4 Polymer

See Specifications Sheet HERE!

To be called a GFCI (Ground Fault Circuit Interruptor) the unit needs to trip no higher than 6mA.  Above that the unit becomes an ELCI (Equipment Leakage Circuit Interruptor).

A Ground-fault occurs when there is a break in the low resistance grounding path from a tool or electrical system. The electrical current may then take an alternative path to the ground through the user, resulting in serious injury or death.  The ground-fault circuit interrupter, or GFCI, is a fas acting circuit breaker designed to shut of electric power in the event of a ground fault within as little as 1/40 of a second. It works by comparing the amount of current going to and returning from the equipment along the circuit conductors. When the amount going differs from the amour retuning by approximately 5 milliamperes (4-6mA), the GFCI trips/interrupts the current.

The GFCI is rated to trip quickly enough to prevent an electrical incident.  If it is properly installed and maintained, this will happen as soon as the faulty tool is plugged in.  If the grounding conductor is not intact or of low impedance the GFCI may not trip until a person provides a path.  In this case, the person will receive a shock, but the GFCI should trip so quickly that the shock will not be harmful. The most common type of shock is from the Ground Fault. GFCIs also protect against fires, overheating and wire destruction.

TRC HD-PRO 24672-001 60 AMP Adjustable (6/10/30 mA) GFCI / ELCI, 480/3 VAC

Southwire HD-PRO 24672 GFCI from TRC - 60 amps, 480 volts

Sords Electric
216-765-4233
www.sordselectric.com

Una pérdida a tierra ocurre cuando hay una ruptura en el camino de resistencia baja para conexión a tierra de una herramienta o un sistema eléctrico. La corriente eléctrica entonces puede tomar una trayectoria alterna a la tierra a través del trabajador, resultando en lesiones serias o la muerte.

El interruptor para circuitos con pérdida a tierra, o GFCI, es un circuito interruptor de energía de acción rápida diseñado para desconectar la energía eléctrica en caso de una pérdida a tierra en un lapso de 1⁄40 de segundo. Esto funciona comparando la cantidad de corriente que sale y que regresa del equipo a lo largo de los conductores de circuito. Cuando la cantidad que sale es diferente de la cantidad que regresa por aproximadamente 5 mili-amperios, el GFCI interrumpe la corriente.

El GFCI está clasificado para desconectar la corriente suficientemente rápido para prevenir un incidente eléctrico. Si es instalado y mantenido correctamente, esto pasará tan pronto como el equipo defectuoso es enchufado. Si el conductor de conexión a tierra no está intacto o es de baja impedancia, el GFCI quizás no funcione hasta que una persona le proporcione una trayectoria. En este caso, la persona recibirá una descarga, pero el GFCI debe activarse tan rápidamente que la descarga no sería mortal o dañina.

TRC HD-PRO 24672-001 60 AMP Adjustable (6/10/30 mA) GFCI / ELCI, 480/3 VAC

Sords Electric

216-765-4233
www.sordselectric.com

Technology Research Corporation - Southwire 

TRC HD-PRO GFCI ELCI 24672-001 60 amps 480/3/60 volts

Sords Electric NEW Website

Sords Electric announces a brand new Website Platform.

We accept VISA, AMEX, M/C, Discover and PayPal

For a quote please contact us HERE!

Brands represented:

Amerimation	Convectronics	MDI	TECO Westinghouse
ATC	Danfoss	Meltric	Toshiba
Autonics	Diversified Electronics	Pepperl+Fuchs	TRC
Barksdale	Fenwal	Q'Mark	United Electric Controls
Bosch	Jessup	Robertshaw Schneider Electric	Watlow
BriskHeat	Kidde Fenwal	SSAC	Weintek
Carlo Gavazzi	Littelfuse	Stiebel-Eltron
Chromalox	Lovato Electric	Tapeswitch

Parts and Components

Electric Heaters

Strip, Cartridge, Band, Air, Unit, Wall, Radiant, Heating Cable, Drum, Water

Timers - Counters - Time Delay Relays

Current Monitors, Voltage Monitors, Phase Monitors, Voltage Alerts

Power Switching Devices

Contactors, Solid State Relays, SCRs, 

Switches

Proximity, Level, PhotoElectric, Inductive, Capacitance, Vibration, Pressure

Temperature Controls

THERMOSWITCH, Process DIN Controls, Detect-A-Fire Switches

Motors and Drives 

Uninteruptible Power Supplies 

Pin and Sleeve Connectors

HMIs

Ground Fault Circuit Interrupters - GFCIs

For a quote please contact us HERE!

Sords Electric - 216-765-4230

www.sordselectric.com

Carlo Gavazzi LD30 Photo Electric Switch

Carlo Gavazzi LD30CNB ABS Photo Electric Switch from Sords Electric

For a quote, Please use our Carlo Gavazzi Parts Form HERE!

This new Carlo Gavazzi family consists of 4 sensor types, in either IP67 plastic (LD30CNB) or IP69K stainless steel AISI316L (LD30ETB) housings. Furthermore, every Gavazzi sensor can be easily configured in more than half a million combinations through the IO-Link communications, which increases flexibility to solve challenging applications.

The Carlo Gavazzi LD30 sensors have been developed to operate in IO-Link environments, where the sensing performance needs to be monitored and logged. Thanks to the easy and full customization of the sensors, customers can choose from lots of combinations of settings and meet their specific requests. With the launch of these photoelectric sensors with ToF technology and integrated IO-Link functionality, Carlo Gavazzi strengthens their position in the market with a wider product offering.

Description:

The LD30CNBI10BPxxIO sensor family comes in a compact 10 x 30 x 20 mm ABS housing.
They are designed for use in applications where high-accuracy detection as well as small size is required.
Compact housing and high power LED for excellent performance-size ratio.
The compact sensor design is ideally suited to con ned spaces. 

Benefits:

• Long range Background suppression TOF (Time of Flight) sensor with IO-Link with a adjustable distance of 50 to 1.000 mm, either by potentiometer or via IO-Link.
  
• Infrared laser class 1 assure a reliable detection.
  
• Easy customization to speci c OEM requests by use of
  the build in IO-Link functionalities.
  
• The output can be operated either as a standard
  switching output or in IO-Link mode.
  
• Fully con gurable via output IO-Link v 1.1. Electrical
  outputs can be configured as PNP / NPN / Push-Pull /
  External input, normally open or normally closed.
  
• Timer functions can be set, such as ON-delay, O -
  delay, and one shots.
  
• Logging functions: Temperatures, detecting counter,
  power cycles and operating hours.
  
• Detection modes Single point, two point and windows
  mode.
  
• Logic functions: AND, OR, XOR and Gated SR-FF.
  
• Analogue output: In IO-Link mode the sensor
  will generate 16 bit analogue process data output representing the distance to the object. 
  

Applications:

• The sensor has multiple detects functions e.g. in single point mode the presence or absence of objects are detected while cutting o the background information.
  
• The detection distance is very independent of the colour of the objects to be detected.
  
• The “analogue” distance from the sensor to the object is available via the IO-Link communication. 
  

Main Functions:

• The sensor can be operated in IO-Link mode once connected to an IO-Link master or in standard I/O mode.
  
• Adjustable parameters via IO-Link interface:
  ► Sensing distance and hysteresis.
  ► Sensing modes: single point or two point or window mode.
  ► Timer functions, e.g.: On-delay, O delay, One shot leading edge or trailing edge.
  ► Logic functions such as: AND, OR, X-OR and SR-FF.
  ► External input.
  ► Logging functions: Maximum temperatures, minimum temperatures, operating hours, operating
  cycles, power cycles, minutes above maximum temperature, minutes below minimum temperature,
  etc.
  ► Auto hysteresis 
  

Part Numbers:

LD30CNBI10BPA2IO
LD30CNBI10BPM5IO

For a quote, Please use our Carlo Gavazzi Parts Form HERE!

Sords Electric
216-765-4230
www.sordselecric.com

Carlo Gavazzi Carlo Gavazzi Carlo Gavazzi Carlo Gavazzi Carlo Gavazzi Carlo Gavazzi

Dynamic Single-Phase Motor Starter from Carlo Gavazzi

Gavazzi Dynamic Motor Starter from Sords Electric

Use our Carlo Gavazzi Parts for to get a quote HERE!

CARLO GAVAZZI has launched the HDMS Series, a single-phase motor soft-starter. It is an ideal solution for systems used in areas with weak power grids. Its unique design and control algorithm eliminate the need for a traditional start capacitor, effectively increasing reliability. This same innovative control strategy allows the HDMS to easily start Capacitor Start / Capacitor Run (CSCR) motors, and in the case of Permanent Split Capacitor (PSC) motors, virtually eliminate the starting current.
This product offers as much as 70% current reduction when compared to Direct On-Line (DOL) starters, which makes the HDMS the perfect choice for applications such as heat pumps, submersible pumps, or other scroll compressor loads connected to generators or electrical inverters. Innovative features include Near Field Communication (NFC), Modbus communication, and ease of use as the HDMS does not require any user settings or adjustments. Features of the HDMS include: 

•   Single-phase 110 to 230 VAC, 50/60 Hz operating  voltage range
  
•   Self-learning algorithm continuously adapts to  load conditions for motor start           optimization
  
•   Broad operational current range: 12, 25, 32, 37  Arms @ 60°C (140°F) 
  
•   No start capacitor required
  
•   Tool-free design for quick, error-free installation 
  
•   Data downloads via NFC communication with 143 
    alarm event storage capacity to expedite troubleshooting
  
  
  
  Real-time data analysis through Modbus communication
  
  
  
  Specialized algorithm for scroll compressors and submersible pumps 
   SCR protected relays for increased lifetime
  
  
  

  2 relay outputs (configurable logic) for Alarm, Top of Ramp
  
  
  

  Integrated Class 10 motor overload protection
  
  

  Conformal coated PCBs for additional protection against humidity
  

  
  

  Agency approvals: cULus Listing, CE certification 

  
  
  

  

  Gavazzi HDMS Motor Starter

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  The HDMS is a dynamic motor starter for single phase scroll compressors and submersible pumps.
  Through an innovative control strategy, capacitor Start-Capicitor Run (CSCR), motors, can now be started without a start capacitor. In the case of Permanent Split Capacitor (PSC) motors, the starting current is virtually eliminated.
  All the HDMS PCBs have a conformal coating for higher resistance to harsh environmental conditions.
  The Ramp-Up time is limited to a maximum of 1 second making it an ideal solution for the scroll compressors and submersible pumps.
  
  
  The HDMS Series Motor Starters are the best choice for increasing reliability, reducing costs on utility contracts and improving motor operation. 

HDMS Part Numbers:

Panel Mount Style: 
HDMS2312G0V20      12 Arms
HDMS2312G0V20C   12 Arms  Modbus
HDMS2325G0V20C   25 Arms  Modbus
HDMS2332G0V20C   32 Arms  Modbus
HDMS2337G0V20C   37 Arms  Modbus

DIN Mount Style:
HDMS2312G0V21      12 Arms
HDMS2312G0V21C   12 Arms  Modbus
HDMS2325G0V21C   25 Arms  Modbus
HDMS2332G0V21C   32 Arms  Modbus
HDMS2337G0V21C   37 Arms  Modbus

Use our Carlo Gavazzi Parts for to get a quote HERE!

Sords Electric
216-765-4230
www.sordslectric.com

...Carlo Gavazzi...Carlo Gavazzi...Carlo Gavazzi...Carlo Gavazzi...

Convectronics Air Heater Instructions

Convectronics Operating Instructions for Air Heaters

Air Heaters from Convectronics

Triple Pass Convectronics Heater

Mounting

Mount heater in desired position. Care should be taken not to restrict exit end of heater. Mechanical shock and vibration should be minimized. Those heaters with quartz envelopes (Style 001) should be handled with a protective layer of cloth or paper to prevent contamination from finger prints. If quartz is contaminated, it should be cleaned with soap and water or mild solvent prior to operation of heater.


Air Supply

Connect a clean filtered and regulated air source to the inlet air connection of the heater. This air must be free of oils and other forms of contamination to prevent drastic reduction of heater life. A means of regulation is required so that the air flow rate can be adjusted and controlled which will allow maximum heater performance flexibility. A blower capable of operating at 1-2 PSI can be used to supply the 13” housing (Style 003). A compressed air source is required for the other heater types because of the higher pressures involved.

Electric Power Connection

Electric connections are made through ¼ x .032 male disconnects provided on Style 001 heaters or through the lead wires provided on Style 003 heaters. These connections should be made to the appropriate voltage source by means of a variable transformer so that voltage to the heater can be manually controlled. CONVECTRONICS offers a Power Control Module (#006-10062) which can be used in place of the transformer. This solid state device is rated up to 25 amps and offers infinitely variable phase control. CONVECTRONICS also offers temperature controllers to operate in conjunction with a solid state contactor (with adjustable voltage limiting). Because of the low mass and quick response of these heaters, use only phase angle power control (not zero cross) with
voltage limiting.

Operation

Consult performance curves before operation of heater. Air temperature and ultimately the heater life depend on the heater type, the air flow rate, and the applied voltage. Do not operate beyond the recommended limits. Maximum heater life will occur when the filament temperature does not exceed 1950° F.

Turn on air source and adjust to desired flow rate before applying voltage to heater. Air flow should not be stopped until after power has been turned off and heater has cooled. Pressure switches are available, which can be used to automatically turn off power if air flow is too low or stopped.

Turn on power source and increase voltage until desired temperature is reached. When automatic controls are used, set voltage limiting adjustment so that the maximum voltage does not exceed 100% of the normal steady state value required to maintain the desired conditions. Too high a setting will cause the heater to overshoot, cycle excessively and reduce its life. Do Not use zero cross systems. 

When a shield or flare is used with the Style 001 heaters the heater becomes more efficient and therefore the required power will be 10-20% less than normal.

Flameless Electric Air Heaters

Sords Electric
216-765-4230
www.sordselectric.com

Convectronics..Convectronics..Convectronics..Convectronics..Convectronics..Convectronics

Gavazzi Compact Magnetic Sensors

Sords Electric sells Carlo Gavazzi Safety Sensors/Switches

For a quote, Use Our Carlo Gavazzi Form HERE.

CARLO GAVAZZI has launched the MC36C Series Compact Safety Magnetic Sensors, designed for safety-related applications, such as the monitoring of swinging, sliding or removable safety guards, which keep personnel safe from dangerous areas. The Carlo Gavazzi MC36C Series of magnetically-coded REED safety magnetic sensors are the ideal solution to monitor the position of sliding, hinged and removable safety guards, especially in dirty and dusty environments. Thanks to their wide actuation range, the MC36C magnetic sensors are ideally suited for use in applications where great tolerances are required, such as with safety gates or doors which are imprecisely aligned.

Gavazzi MC36C Safety Magnetic Switch

The Carlo Gavazzi MC36C Series are extremely versatile and can work as standalone or in conjunction with a safety module to reach a safety category 4, according to the EN ISO 13849-1 Standard. These are some of the features which make these sensors extremely flexible to meet various application requirements: compact size (36x26x13mm), output configuration (2 NO or 1 NO and 1 NC), availability with 2m cable or M8 quick disconnect (left or right exit).

·      Assured switching range: 5mm with MC36CM

·      Assured switch-off range: 15mm with MC36CM

·      Operating temperature: -25 to +80°C (-13 to 176°F)

·      Rated operating voltage: 12-24 VAC/VDC

·      Rated operating current: 0.25 A (resistive)

·      Maximum switching load: 6W (resistive)

·      Maximum operating frequency: 100 Hz

·      Optional LED indication

·      Degree of protection: IP67

·      CE and cULus approved

The Carlo Gavazzi MC36C safety magnetic sensors are the best choice for non-contact detection and are suitable to monitor safety gates that prevent the entry of personnel in the vicinity of dangerous machines in motion, such as conveyors, robots, mechanical links, etc.

For a quote, Use Our Carlo Gavazzi Form HERE.


Sords Electric
216-765-4230
www.sordselectric.com