Dynamic Single-Phase Motor Starter from Carlo Gavazzi

Gavazzi Dynamic Motor Starter from Sords Electric

Use our Carlo Gavazzi Parts for to get a quote HERE!

CARLO GAVAZZI has launched the HDMS Series, a single-phase motor soft-starter. It is an ideal solution for systems used in areas with weak power grids. Its unique design and control algorithm eliminate the need for a traditional start capacitor, effectively increasing reliability. This same innovative control strategy allows the HDMS to easily start Capacitor Start / Capacitor Run (CSCR) motors, and in the case of Permanent Split Capacitor (PSC) motors, virtually eliminate the starting current.
This product offers as much as 70% current reduction when compared to Direct On-Line (DOL) starters, which makes the HDMS the perfect choice for applications such as heat pumps, submersible pumps, or other scroll compressor loads connected to generators or electrical inverters. Innovative features include Near Field Communication (NFC), Modbus communication, and ease of use as the HDMS does not require any user settings or adjustments. Features of the HDMS include: 

•   Single-phase 110 to 230 VAC, 50/60 Hz operating  voltage range
  
•   Self-learning algorithm continuously adapts to  load conditions for motor start           optimization
  
•   Broad operational current range: 12, 25, 32, 37  Arms @ 60°C (140°F) 
  
•   No start capacitor required
  
•   Tool-free design for quick, error-free installation 
  
•   Data downloads via NFC communication with 143 
    alarm event storage capacity to expedite troubleshooting
  
  
  
  Real-time data analysis through Modbus communication
  
  
  
  Specialized algorithm for scroll compressors and submersible pumps 
   SCR protected relays for increased lifetime
  
  
  

  2 relay outputs (configurable logic) for Alarm, Top of Ramp
  
  
  

  Integrated Class 10 motor overload protection
  
  

  Conformal coated PCBs for additional protection against humidity
  

  
  

  Agency approvals: cULus Listing, CE certification 

  
  
  

  

  Gavazzi HDMS Motor Starter

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  The HDMS is a dynamic motor starter for single phase scroll compressors and submersible pumps.
  Through an innovative control strategy, capacitor Start-Capicitor Run (CSCR), motors, can now be started without a start capacitor. In the case of Permanent Split Capacitor (PSC) motors, the starting current is virtually eliminated.
  All the HDMS PCBs have a conformal coating for higher resistance to harsh environmental conditions.
  The Ramp-Up time is limited to a maximum of 1 second making it an ideal solution for the scroll compressors and submersible pumps.
  
  
  The HDMS Series Motor Starters are the best choice for increasing reliability, reducing costs on utility contracts and improving motor operation. 

HDMS Part Numbers:

Panel Mount Style: 
HDMS2312G0V20      12 Arms
HDMS2312G0V20C   12 Arms  Modbus
HDMS2325G0V20C   25 Arms  Modbus
HDMS2332G0V20C   32 Arms  Modbus
HDMS2337G0V20C   37 Arms  Modbus

DIN Mount Style:
HDMS2312G0V21      12 Arms
HDMS2312G0V21C   12 Arms  Modbus
HDMS2325G0V21C   25 Arms  Modbus
HDMS2332G0V21C   32 Arms  Modbus
HDMS2337G0V21C   37 Arms  Modbus

Use our Carlo Gavazzi Parts for to get a quote HERE!

Sords Electric
216-765-4230
www.sordslectric.com

...Carlo Gavazzi...Carlo Gavazzi...Carlo Gavazzi...Carlo Gavazzi...

Toshiba S-15 Micro-Drive

Toshiba S15 Low Voltage ASD - 

Available from Sords Electric

Heavy Duty Micro Drive

Toshiba’s heavy duty S15 adjustable speed drive is a compact and high performance drive designed for controlling a wide range of variable and constant torque applications. This micro-drive is capable of working with permanent magnet (PM) motors, which allows a greater flexibility in selecting a motor for an application and optimizes energy savings. A robust design allows the S15 to operate in extreme temperatures and environments. In addition, the S15 features advanced technologies, and an expanded PID control allows a greater level of precise control and operation of difficult level control applications. No other micro-drive delivers such reliable and extreme performance with extensive capabilities at such a competitive cost.

Toshiba S15 Specifications

MODEL RANGE    1/4 HP to 3 HP1/2 HP to 20 HP1/2 HP to 20 HP

Voltage Rating   Single-Phase 230 VACThree-Phase 230 VACThree-Phase 460 VAC

POWER REQUIREMENTS 

Input Tolerance   Voltage: ±10%; Frequency: ±5%

Output Frequency   0.1 to 500 Hz

CONTROL SPECIFICATIONS 

Control Method    Sinusodial Pulse Width Modulation (PWM); Flux-Field Current Vector Control; Set Point Control (PID)

Voltage Regulation   Main Circuit Voltage Feedback Control: Automatic, Fixed, & Off

V/Hz Control    V/f Constant, Variable Torque, Automatic Torque Boost, Vector Control, PM Motor Control, 5-point V/F Custom Setting, & Auto-Tuning

PWM Carrier Frequency    Adjustable 2 to 16 kHz (For Drive Specific Information Consult Factory)

Frequency Setting    Rotary Encoder Integrated into EOI, 0 to 10 VDC, ±10VDC, 4 to 20 mA, Digital Input, Binary Input, & Motorized Potentiometer Input

Frequency Precision   Analog Input ±0.5% of Maximum Output Frequency; Discrete/Communications Input ±0.01% of Maximum Output Frequency

Speed Regulation   Open Loop: Up to 0.1%, 60:1 Speed Range

Main Protective Functions   Stall Prevention, Current Limit, Over-Current, Output Short Circuit, Over-Voltage, Over-Voltage Limit, Undervoltage, Ground Fault Detection, Input Phase Failure, Output Phase Failure, Overload Protection by Electronic Thermal Function, Armature Over-Current at Start-Up, Load Side Over-Current at Start-Up, Over-Torque, Undercurrent, Overheating, Cumulative Operation Time, Life Alarm, Emergency Stop, & Various Pre-alarms

Retry      User-Set Number of Retries for Automatic System 

Restart   After TripRestartAble to Smoothly Catch Freewheeling Motor (Bidirectional)

Overload Current Rating    110% Continuous; 150% for 1 Minute

CONTROL INTERFACE 

Digital Input  6 Discrete Input Terminals Programmable to 110 Functions (May Be Increased Using Optional Hardware)

Digital Output  3 Discrete Output Terminals Programmable to 150 Functions; 1 Form-A Contact, 1 Form-C Contact, & 1 Open Collector Output

Analog Input  3 Programmable: One 4 to 20 mA Input, One 0 to 10 VDC Input, & One ±10 VDC Input

Analog Output    1 Programmable: 4 to 20 mA or 0 to 10 VDCCommunication PortsRS485 Port (TSB or MODBUS RTU Protocol)

ELECTRONIC OPERATOR INTERFACE (EOI) 

Display    4x20 Graphical Full-English LCD Back-Lit Display for Programming, Monitoring, & Diagnostics

LED Indicators    Run (Red)/Stop (Green), Hand (Green), & DC Bus Charge Indicator (Red)

Keys    Run, Prg, Mon, Status, %, Hz, Stop, Mode, & Easy Key; Rotary Encoder for Parameter Navigation, Settings, & Control

Monitoring    Frequency Command Screen; Multiple Parameters Displayed: Output Frequency, Forward/Reverse Run, Output Current, Input Voltage (DC Detection), Output Voltage, Torque, Inverter Load Factor, Motor Load Factor, Braking Resistor Load Factor, Input Power, Output Power, Input Terminal status, Output Terminal Status, Overload/Regional Setting, PID Feedback Value, Stator Frequency, Parts Replacement Alarm, Cumulative Operation Time, & Past Trips

CONSTRUCTION 

Enclosure       RAL 7016 (Anthracite Gray); IP20; Wall-Mount; Front-Access Only

Power Cables    Bottom Access for Input/Motor Cables

Cooling   Self-Cooling/ Forced Air-Cooled

Standards & Compliances   UL Listed in US & Canada, CSA, & CE

AMBIENT CONDITIONS 

Ambient Temperature   0 to 60°C (Note: See Manual for Details, Ambient Temperatures Above 50°C May Require a De-Rate)

Altitude   3300 ft. Above Sea Level (Up to 10,000 ft. with Derate)

Humidity   95% Maximum (Non-Condensing)

Installation   Indoors; No Direct Sunlight; Protects from Corrosive Gas/Explosive Gas/Flammable Gas/Oil Mist/Dust; Vibration of Less Than 5.9 m/s2 (10 to 55 Hz)

S-15 Standard power Unit

230 Volts / Single Phase

VFS15S-2002PL-W   1/4 HP / 1.5 FLA

VFS15S-2004PL-W  1/2 HP / 3.3 FLA

VFS15S-2007PL-W  1 HP / 4.8 FLA

VFS15S-2015PL-W  2 HP / 8 FLA

VFS15S-2022PL-W   3 HP / 11 FLA

230 Volts / Three Phase

VFS15-2004PM-W   1/2 HP / 3.3 FLA

VFS15-2007PM-W   1 HP / 4.8 FLA

VFS15-2015PM-W  2 HP / 8 FLA

VFS15-2022PM-W  3 HP / 11 FLA

VFS15-2037PM-W   5 HP / 17.5 FLA

VFS15-2055PM-W  7.5 HP / 27.5 FLA

VFS15-2075PM-W   10 HP / 33 FLA

VFS15-2110PM-W   15 HP / 54 FLA

VFS15-2150PM-W   20 HP / 66 FLA

460 Volts / Three Phase

VFS15-4004PL-W 1/2 HP / 1.5 FLA

VFS15-4007PL-W 1 HP / 2.3 FLA

VFS15-4015PL-W 2 HP / 4.1 FLA

VFS15-4022PL-W 3 HP / 5.5 FLA

VFS15-4037PL-W 5 HP / 9.5 FLA

VFS15-4055PL-W 7.5 HP / 14.3 FLA

VFS15-4075PL-W 10 HP / 17 FLA

VFS15-4110PL-W 15 HP / 27.7 FLA

VFS15-4150PL-W 20 HP / 33 FLA

S-15 Premium power Unit

230 VOLTS / SINGLE PHASE Toshiba S15 Drives

VFS15S-2002PL 1/4 HP / 1.5 FLA

VFS15S-2004PL 1/2 HP / 3.3 FLA

VFS15S-2007PL 1 HP / 4.8 FLA

VFS15S-2015PL 2 HP / 8 FLA

VFS15S-2022PL 3 HP / 11 FLA

230 VOLTS / THREE PHASE Toshiba S15 Toshiba Drives

VFS15-2004PM 1/2 HP / 3.3 FLA

VFS15-2007PM 1 HP / 4.8 FLA

VFS15-2015PM 2 HP / 8 FLA

VFS15-2022PM 3 HP / 11 FLA

VFS15-2037PM 5 HP / 17.5 FLA

VFS15-2055PM 7.5 HP / 27.5 FLA

VFS15-2075PM 10 HP / 33 FLA

VFS15-2110PM 15 HP / 54 FLA

VFS15-2150PM 20 HP / 66 FLA

460 VOLTS / THREE PHASE Toshiba S15 Toshiba Drives

VFS15-4004PL 1/2 HP / 1.5 FLA

VFS15-4007PL 1 HP / 2.3 FLA

VFS15-4015PL 2 HP / 4.1 FLA

VFS15-4022PL 3 HP / 5.5 FLA

VFS15-4037PL 5 HP / 9.5 FLA

VFS15-4055PL 7.5 HP / 14.3 FLA

VFS15-4075PL 10 HP / 17 FLA

VFS15-4110PL 15 HP / FLA

VFS15-4150PL 20 HP / 33 FLA

TOSHIBA DRIVES ON SORDS ELECTRIC

1-800-929-4825

Other Drives by Toshiba Sold by Sords Electric; the Toshiba P9 drive for Pumps.