Fenwal Stock at Sords Electric

Sords Electric Stocks Fenwal THERMOSWITCHES and Fenwal Detect-A-Fire Sensors

08-023371-381	FENWAL THERMOSTAT
08-023387-129	FENWAL SNAP DISC THERMOSTAT
THERMOSWITCHES 17000-0	FENWAL THERMOSWITCH
17002-0	FENWAL THERMOSWITCH
17021-0	FENWAL THERMOSWITCH
17100-0	FENWAL THERMOSWITCH
17102-0	FENWAL THERMOSWITCH
17200-0	FENWAL THERMOSWITCH
17202-0	FENWAL THERMOSWITCH
17223-0	FENWAL THERMOSWITCH
17250-0	FENWAL THERMOSWITCH
17250-0-MOD2	FENWAL THERMOSWITCH
17300-0	FENWAL THERMOSWITCH
17302-0	FENWAL THERMOSWITCH
17702-0	FENWAL THERMO SWITCH
17800-0	FENWAL THERMO SWITCH
18000-0	FENWAL THERMOSWITCH
18002-0	FENWAL THERMOSWITCH
18002-21	FENWAL THERMOSWITCH
18021-0	FENWAL THERMOSWITCH
18023-0	FENWAL THERMOSWITCH
18023-007	FENWAL THERMOSWITCH
This is an obsolete series but the below are in stock. 20110-0	FENWAL THERMOSWITCH  50 pcs as of 12/31/15
20310-0	FENWAL THERMOSWITCH    4 pcs as of 12/31/15
22700-0	FENWAL THERMOSWITCH    1 pcs as of 12/31/15
22720-0	FENWAL THERMOSWITCH    3 pcs as of 12/31/15
DAFs in Stock as of 12/31/15 27021-0 140	FENWAL DETECT-A-FIRE, 140F
27120-0 140	FENWAL DETECT-A-FIRE, 140F
27120-0 190	FENWAL DETECT-A-FIRE, 190F
27120-0 275	FENWAL DETECT-A-FIRE,  275F
27120-022 190	FENWAL DETECT-A-FIRE, 190F
27120-022 225	FENWAL DETECT-A-FIRE, 225F
27121-0 140	FENWAL DETECT-A-FIRE, 140F
27121-0 160	FENWAL DETECT-A-FIRE, 160F
27121-0 190	FENWAL DETECT-A-FIRE, 190F
27121-0 450	FENWAL DETECT-A- FIRE, 450F
27121-0 600	FENWAL DETECT-A-FIRE, 600F
27121-0 725	FENWAL DETECT-A-FIRE, 725F
28021-005 160	FENWAL DETECT-A-FIRE
30000-0	FENWAL Surface Mount THERMOSWITCH
30000-48	FENWAL Surface Mount THERMOSWITCH
30002-0	FENWAL Surface Mount THERMOSWITCH
Obsolete Digital Controllers 92-11120-100	FENWAL PID Temp CONTROLLER 921 series
92-311311-100	FENWAL PID Temp CONTROLLER 923 series
92-313200-100	FENWAL PID Temp CONTROLLER 923 series

Call for pricing and to check stock.


www.sordselectric.com
800-929-2845

Watlow 375 Strip Heaters

Sords Electric Supplies Watlow Strip Heaters

Our New Webstore opened in April 2020!!

Watlow 375 Strip heaters are named for their .375 inch thickness and is capable of high temperatures and high watt densities.  The strip heater come in offset, parallel and split  (end-end) terminals.  The offset configuration is the most common know as OT. The coiled nickel-chromium wires are placed in the center of the heater and then imbedded with magnesium oxide (Mg)) insulation and compacted into a solid mass to hold the element in place and provide electrical insulation. MgO is an excellent heat conductor with high dielectric strength.  The outer sheath is aluminized steel or Stainless Steel.

Sheath temperatures to 1100 and 1200.  Watt densities to 100 watts per square inch.
UL approved to 240VAC and CSA approved to 600VAC.

To view the Watlow Catalog Sheet click HERE!




Watlow strip heater Aluminized Steel sheath SGA1J47RO1
48 inch, 240 volt, 2250 watt

Watlow Strip Heater Aluminized Steel sheath SGA1J38JO3
36 inch, 240 volt, 1500 watt

Watlow Strip Heater Aluminized Steel sheath SGA1J35RO1
36 inch, 240 volt, 1000 watt

Watlow Strip Heater Aluminized Steel sheath SGA1J33JO1
33 inch, 240 volt, 750 watt

Watlow Strip Heater Aluminized Steel sheath SGA1J26NO2
27 inch, 240 volt, 1000 watt

Watlow Strip Heater Aluminized Steel sheath SGA1J19JO1
19 inch, 240 volt, 1000 watt

Watlow Strip Heater Aluminized Steel sheath SGA1J15EO4
15 inch, 240 volt, 500 watt

120 volt strip heaters available too.
Go to our complete list of Watlow Strip Heaters, HERE.

Contact us HERE or as below.
www.sordselectric.com
888-929-2845

Watlow Temperature Controllers

Watlow PM Express Temperature Controllers from Sords Electric

Temperature Controller: A temperature controller is a device used to hold a desired temperature at a specified value. For Example: When a Temperature controller is used in an oven: When a temperature is set for an oven, a controller monitors the actual temperature inside of the oven.

The EZ-ZONE PM Express panel mount controller is an industry-leading PID controller that allows optimal performance utilizing simple control and menu functionality without complex features. It is ideal for basic applications and usage levels.

The EZ-ZONE PM Express is the next generation controller to follow the legacy of Watlow's SERIES 93, SERIES 935 AND SERIES SD controllers that offer easy-to-use features for many basic applications. The Watlow EZ-ZONE PM Express includes one universal input and an option for up to two outputs and is available in 1⁄32 and 1⁄16 DIN panel mount packages. It can be ordered as a PID process controller or as a dedicated over and under-temperature limit controller.

Watlow PM Express PM6C1EJ-AAAABAA

Two 5 amp Form C relay, Universal input (T/C, 0-20mA, 0-10vdc, RTD), Input Voltage 100-240 VAC

Watlow PM Express PM6C1FA-AAAABAA

One universal Process output, Universal input (T/C, 0-20mA, 0-10vdc, RTD), Input Voltage 100-240 VAC

Watlow PM Express PM6C1KK-AAAABAA

Outputs are Two SSR Form A .5 amp outputs, Universal input (T/C, 0-20mA, 0-10vdc, RTD), 100-240 VAC

Watlow PM Express PM3C1EA-AAAABAA

Output is one 5 amp Form C relay, Universal input (T/C, 0-20mA, 0-10vdc, RTD), Input Voltage 100-240 VAC

Watlow PM Express PM3C1FA-AAAABAA

One universal Process output, Universal input (T/C, 0-20mA, 0-10vdc, RTD), Input Voltage 100-240 VAC

Watlow PM Express PM3C1KK-AAAABAA

Two SSR Form A .5 amp outputs, Universal input (T/C, 0-20mA, 0-10vdc, RTD), Input Voltage 100-240 VAC

Watlow Manufactures their controllers in the USA.  Controllers are UL and cUL, CSA and CE listed.

www.sordselectric.com

888-929-2845

Meltric DSN 30 208-220 volt 5 HP OSHA rated Plug

Sords Electric Stocks the Meltric DSN30 deContactor from Meltric. The DSN 30 is ideal for welders, compressors, heaters, pumps, motors, and fans.  All Meltric DSN switch plugs are OSHA rated and can be disconnected and connected under load. The switch also serves as a disconnect switch and meets the requirement for a disconnect switch "in sight" of the application.  Below are the parts for a 30 amp 208/240 wall mount system.


Meltric 30 degree angle with Junction box; part number 61-3A053-080-34
Used with DSN 30, DS 20, DR 30 and DSN24c decontactors/plugs.
UPC  784474562409

Meltric Inlet/plug rated 30A, 208-250 volts, 5HP, 4X; part number 63-38073
DSN30 Male Plug used with DSN30 receptacle below.
UPC 784474545204

Meltric Receptacle/connector rated 30A, 208-250 volts, 5HP, 4X; part number 63-34073
DSN30 Female sleeve/socket used with DSN30 plug above.
UPC 7844745445211

Meltric 61-3A013 Nylon Handle for all 30 amp DSN 30 receptacles or plugs. Accepts cable range .20 - .82. NEMA 4 X handle with weather tight grommet at cable entrance.

216-765-4230
Contact Sords Electric

Meltric Parts in Stock at Sords Electric

These Meltric spare parts are in stock for immediate shipment from Sords Electric

All parts in original packaging.
Please call 216-765-4230 to order.
These parts are not on our online ordering system at present, please call or email to order.

Meltric 61-1A346 DSN 20 Finger Draw Plate  $ 18.00 (set of 2)
Used with PN7, PN12, PN5 and DSN1 Meltric DeContactors

 

Meltric 61-1A826 DSN 20 Locking Cap  $ 48.50
Used with  DSN1 Meltric DeContactors

Meltric 61-3AN26 DSN 30 Black Gasket   $ 4.95
Used with Meltric DeContactors

Meltric 61-3A824 DSN 3 Latch Replacement Kit  $ 10.00 
Used with DSN30 Meltric DeContactors (Old Style - pre 2013)

Meltric 61-1A126 DSN 20 Inlet Cap  $ 19.00
Used with PN7, PN12, PN5 and DSN1 Meltric DeContactors

 


Meltric 61-3A125 DSN 30 Lid Replacement Kit Polyester  $ 18.00
Used with DSN30 Meltric DeContactors

 


Meltirc Adapter Plate for Ralco Plugs $ 25.00
AP-RALCO322-DSN60 : Used with  DSN60 Meltric DeContactors

Meltric 31-6A024-143 DS 60 RECEPTACLE CASING  $ 89.00
Used with DS60 Meltric DeContactors - 3 phase/600 volts

 


www.sordselectric.com
216-765-4230

3 Phase Power Supplies by Carlo Gavazzi

Sords Electric and Carlo Gavazzi Three Phase Power Supplies


Carlo Gavazzi's range of switch mode power supplies are available in sizes up to 960 Watts and include many models suitable for use in Class 1 / Div 2 areas.
Gavazzi power supplies will accept a 120/220 V input voltage and provide a DC voltage output. We offer outputs in 5 VDC, 12 VDC, 15 VDC, 24 VDC, and 48 VDC.
A built-in filter is available on some units. For higher currents, our 120 W, 240 W, 480 W, and 960 W versions can be used in parallel mode. Also, some models are available with detachable wiring terminals.

Carlo Gavazzi also offers 3-phase power supplies available in these output sizes: 120W, 240W, 480W and 960W. They can be powered by either three phases, or two-phases at a slight derating, and are available with an adjustable 24VDC output (some models are also offered in 12 or 48VDC). Other standard features include diagnostic LEDs, power factor correction and power ready outputs, with parallel function on all models except the 120W version. 

Carlo Gavazzi SPD24-480-3 Power supply, 340-575 volts AC input, 24 vdc 480 watt output.

3 Phase

DIN-rail mount, 83mm

480 watt output, 20 amps

Screw Terminals

Low Voltage LED

Output voltage Adjustment

Short Circuit Protection

Power OK LED

For mounting on DIN-rail in accordance with DIN/EN 50 022

UL, cUL, CE and TUV approved

Two Year Warranty

Carlo Gavazzi power supply SPD24-480-3.

Carlo Gavazzi SPD48-480-3 Power supply, 340-575 volts AC input, 48 vdc 480 watt output.

3 Phase

DIN-rail mount, 83mm

480 watt output, 10 amps

Screw Terminals

Low Voltage LED

Output voltage Adjustment

Short Circuit Protection

Power OK LED

For mounting on DIN-rail in accordance with DIN/EN 50 022

UL, cUL, CE and TUV approved

Two Year Warranty

Carlo Gavazzi power supply SPD24-480-3.

Carlo Gavazzi SPD24-960-3 Power supply, 340-575 volts AC input, 24 vdc 480 watt output.

3 Phase

DIN-rail mount, 83mm

480 watt output, 20 amps

Screw Terminals

Low Voltage LED

Output voltage Adjustment

Short Circuit Protection

Power OK LED

For mounting on DIN-rail in accordance with DIN/EN 50 022

UL, cUL, CE and TUV approved

Two Year Warranty

Carlo Gavazzi power supply SPD24-480-3.

Carlo Gavazzi SPD48-960-3 Power supply, 340-575 volts AC input, 48 vdc 480 watt output.

3 Phase

DIN-rail mount, 83mm

480 watt output, 10 amps

Screw Terminals

Low Voltage LED

Output voltage Adjustment

Short Circuit Protection

Power OK LED

For mounting on DIN-rail in accordance with DIN/EN 50 022

UL, cUL, CE and TUV approved

Two Year Warranty

Carlo Gavazzi power supply SPD24-480-3.

Contact Sords Electric for more information or to order.

216-765-4230

Carlo Gavazzi RAM1A series SSR's

Sords Electric sells 
Carlo Gavazzi RAM1A Solid State Relays
(Standard Hockey Puck form factor (2x2) with industry standard mounting dimensions)

Carlo Gavazzi offers a comprehensive range of solid state relays (SSR’s) featuring direct copper bonding technology for increased life and reliability. SSR’s are used extensively in the plastics, packaging, food processing, and HVAC industries - primarily for temperature control. They are the logical replacement for mercury contractors.

Carlo Gavazzi's solid state relays range includes single phase relays up to 125 amps and 3 phase relays up to 75 amps. They are available with both digital and analogue inputs (4-20 mA or 0-10 V) Furthermore, we also offer a complete range of SSR's with a built-in heatsink.

The industrial, 1-phase relay with antiparallel thyristor out- put is the most widely used industrial SSR due to its mul- tiple application possibilities. The relay can be used for resistive, inductive and capacitive loads. The zero switching relay switches ON when the sinusoidal curve crosses zero and switches OFF when the current crosses zero. The instant-on relay with DC control input can be used for phase angle control. The built-in snubber secures transient protection. The LED indicates the status of the control input. The clip-on cover secures touch protection (IP 20). Protected output terminals can handle cables up to 16 mm2. 

• Zero switching (RAM1A) or instant-on switching (RAM1B) AC Solid State Relay
  
• Direct copper bonding (DCB) technology
  
• LED indication
  
• Clip-on IP 20 protection cover - TOUCH SAFE
  
• Self-lifting terminals
  
• Housing free of moulding mass
  
• 2 input ranges: 3-32 * and 20-280 VAC/22-48VDC
  
• Operational ratings: Up to 125AACrms and 690VACrms
  
• Blocking voltage: Up to 1600Vp
  
• Opto-isolation: > 4000VACrms
  
• Integrated overvoltage protection by self
  switching (suffix “Z” option)
  
• CE, RoHS compliant
  
• cURus, CSA, VDE, CCC 
  

The industrial, 1-phase relay with antiparallel thyristor out- put is the most widely used industrial SSR due to its mul- tiple application possibilities. The relay can be used for resistive, inductive and capacitive loads. The zero switching relay switches ON when the sinusoidal curve crosses zero and switches OFF when the current crosses zero. The instant-on relay with DC control input can be used for phase angle control. The built-in snubber secures transient protection. The LED indicates the status of the control input. The clip-on cover secures touch protection (IP 20). Protected output terminals can handle cables up to 16 mm2. 


RAM1A23D25
25 amp Solid State Relay, DC input, 265 volts or less output

RAM1A23D50
50 amp Solid State Relay, DC input, 265 volts or less output

RAM1A23D75
75 amp Solid State Relay, DC input, 265 volts or less output

RAM1A23D100
100 amp Solid State Relay, DC input, 265 volts or less output

RAM1A23D125
125 amp Solid State Relay, DC input, 265 volts or less output

RAM1A60A125

125 amp Solid State Relay, AC input, 42-660 volts output, Built in MOV

RAM1A60A100
100 amp Solid State Relay, AC input, 42-660 volts output, Built in MOV

RAM1A60A75
75 amp Solid State Relay, AC input, 42-660 volts output, Built in MOV

RAM1A60A50
50 amp Solid State Relay, AC input, 42-660 volts output, Built in MOV
RAM1A60A25
25 amp Solid State Relay, AC input, 42-660 volts output, Built in MOV

Call us to order at 800-929-2845 or visit our we site HERE.