Meltric DSN 30 208-220 volt 5 HP OSHA rated Plug

Sords Electric Stocks the Meltric DSN30 deContactor from Meltric. The DSN 30 is ideal for welders, compressors, heaters, pumps, motors, and fans.  All Meltric DSN switch plugs are OSHA rated and can be disconnected and connected under load. The switch also serves as a disconnect switch and meets the requirement for a disconnect switch "in sight" of the application.  Below are the parts for a 30 amp 208/240 wall mount system.


Meltric 30 degree angle with Junction box; part number 61-3A053-080-34
Used with DSN 30, DS 20, DR 30 and DSN24c decontactors/plugs.
UPC  784474562409

Meltric Inlet/plug rated 30A, 208-250 volts, 5HP, 4X; part number 63-38073
DSN30 Male Plug used with DSN30 receptacle below.
UPC 784474545204

Meltric Receptacle/connector rated 30A, 208-250 volts, 5HP, 4X; part number 63-34073
DSN30 Female sleeve/socket used with DSN30 plug above.
UPC 7844745445211

Meltric 61-3A013 Nylon Handle for all 30 amp DSN 30 receptacles or plugs. Accepts cable range .20 - .82. NEMA 4 X handle with weather tight grommet at cable entrance.

216-765-4230
Contact Sords Electric

Meltric Wall Mount 30 AMP Plug

Meltric Plug Wall Mount System 30 amp from Sords Electric.

Meltric DeContactors provide a very safe and easy way for providing power for air compressors, welders, heaters and large fans. Below is 240/250 volt wall mount version.  These Meltric deContactors are SWITCH rated, meaning you can disconnect under load.  It short, it can also be an emergency disconnect switch. (Mushroom Pawls Available)

System includes Junction box, 30 degree angle, female receptacle, male plug and nylon handle.

Above picture shows all but handle.

Meltric Metal Junction Box with angle 61-3A053-080-12

Meltric Receptacle 63-34073  250 volts

Meltric Plug 63-38073   250 volts

Meltric Nylon Handle 61-3A013


Great for Farm Shops, Warehouses, Plant Floors, Green Houses, Garages, Auto Shops, Gas Stations, Bowling Alleys, Restaurants, Dry Cleaners, Breweries and Hotels.

Other voltages available too: 120, 208, 277, 480, 600
Other Amperages available : 20, 60, 100

30 amps parts are usually stock at Sords Electric
Other amperages are 1 week from Meltric.

Meltric parts request form.

www.sordselectric.com
800-929-2845

Meltric DS30 Industrial Plugs & Receptacles

DS 30 DeContactors by Meltric and Sords Electric

Meltric's DS30 Industrial Plugs and receptacles offer safety, convenience and money savings opportunity for the industrial and commercial workplace.  By meeting NEC codes and NFPA 70E requirements, there is no equal in the quick connect industrial plug market. The dead front construction of the female receptacle, keeping the hot contacts secured from being accidentally touched is unique in the industry.

SAFETY - Dead Front Construction and a RATED Disconnect Switch 
CONVENIENCE - Quick Change outs over hard wiring
MONEY - No Special Suits - Quick Change Outs - SAFE!

Qualified maintenance workers can quickly connect or disconnect welding machines, motors, and other equipment in complete safety. Once the plug is removed it provides visual verficiation of deenergization. The safety shutter on the receptacle prevents exposure to live parts and maintains an NFPA 70E defined hazard risk category = 0. The need for cumbersome PPE to meet NFPA 70E standards can be avoided.

Meltric Decontactors (Switch Rated Plugs and Receptacles) can be used in the follwoing applications:

HVAC :
Workers are exposed to live parts and risk arc flash injury when opening and disconnecting standard blade type disconnect switches. Instead, to prevent accidents and simplify code compliance install UL/CSA switch rated plugs and receptacles from Meltric. They are a combination plug, receptacle and disconnect switch in one device. Meltric's receptacles/connectors feature a built-in switching function that ensures the contacts are safely deenergized before the plug can be withdrawn. Once withdrawn, the plug provides visual verification of deenergization. Arc flash safety is ensured and HVAC service work becomes safer and easier.

PUMPS :
Meltric Decontactor plugs and receptacles are ideal for pump connections up to 60 hp or 200 amps. Using Decontactors to connect power to pumps instead of hard-wiring can reduce downtime related to pump servicing by 50% or more. A qualified technician can safely disconnect power to the pump simply by removing the Decontactor plug which can then be easily locked out to ensure safety. The technician can then service the pump in complete safety. When service work is complete the technician can reconnect power simply by plugging the Decontactor plug back into the receptacle.

TRAILER :
Meltric's DECONTACTOR™ Series “trailer plugs” and receptacles are a combination plug, receptacle and UL/CSA approved disconnect switch in the same device. Decontactors are commonly used to connect power to trailers from a portable generator or from a shore power source. Safety features prevent exposure to arc flash and live parts. Code compliance is greatly simplified because the trailer plug safety features ensure an electrically safe work condition.

WELDING :
Workers risk exposure to arc flash when disconnecting standard welder plugs and receptacles. To prevent accidents install UL/CSA switch rated welder plugs and receptacles from Meltric. They are a combination plug, receptacle and disconnect switch in one device. Meltric’s receptacles/connectors feature a built-in switching function that ensures the contacts are safely deenergized before the welding machine plug can be withdrawn. Arc flash safety is ensured. By having the male plug already wired to the welder, moving the welding apparatus around the plant becomes safe and easy!

GENERATOR :
Workers risk exposure to arc flash when disconnecting standard generator plugs and receptacles. To prevent accidents install MELTRIC UL/CSA switch rated generator plugs and receptacles from Meltric. They are a combination plug, receptacle and disconnect switch in one device. Meltric’s receptacles/connectors feature a built-in switching function that ensures the contacts are safely deenergized before the generator plug can be withdrawn. Arc flash safety is ensured. With multiple recepatacle available on a generator, quickly connecting and disconnecting the right plug into the right receptacle is safe and easy.  Color coded voltage gaskets and "keyed" insertion means the right plug and receptacle go together every time and never a mistake.

CORD DROP and HOIST :
MELTRIC Decontactor plugs and receptacles are designed and rated to make and break electrical loads in complete safety while providing users with significant protection in the event of overloads or short circuits. Special protective equipment and training are not required to make and break connections. MELTRIC DECONTACTOR™ Series switch rated plugs and receptacles are ideal for connecting power to hoist systems. They ensure safety and enable plug and play hoist change-outs. An electrically safe work condition is ensured even when disconnecting under load plus NFPA 70E compliance is greatly simplified. NO SUITS, NO MESS, NO DANGER.

SHORE POWER :
Meltric's shore power plugs and receptacles are ideal for marine ship to shore power connections. Meltric industrial plugs and receptacles offer superior durability and safety relative to pin and sleeve or twist type devices. The silver-nickel, butt style contacts perform particularly well in harsh saltwater environments and safety features ensure protection from arc flash.

MOTORS :
Using Meltric Decontactor plugs and receptacles to connect motors instead of hard-wiring can help to reduce equipment change-out downtime by as much as 50%. Optional integral auxiliary contacts can be used to communicate motor temperatures back to a control center so preventative maintenance can be performed before motor failure occurs.When replacement motors are pre-wired with Meltric Decontactor inlets or plugs, a mechanic can safely perform the electrical connections simply by unplugging the old motor and plugging in the new one. SAFE, QUICK, EASY. Meltric Makes It Easy!

Sections 430.102 – 430.109 of the National Electric Code require approved disconnecting means to be located in a readily accessible location within sight of the motor and driven equipment. With their UL & CSA ratings for “Motor Circuit Disconnect Switching” and “Branch Circuit Disconnect Switching”, Decontactor devices are an approved ‘line of sight’   disconnect switch for meeting this requirement.

DS30 Horsepower ratings:

120 volt single phase: 3/4 HP with a Gasket color of Yellow.
240 volt single phase: 2 HP with a Gasket Color of Orange.
208 volt three phase: 3 HP with a Gasket Color of Blue.
240 volt three phase: 3 HP with a Gasket Color of Orange.
480 volt three phase: 10 HP with a Gasket color of Red.

Common DS30 Part numbers:


33-34076  33-38076  33-34073-4X  33-38073-4X  33-34043  33-38043
   
3PH12  FH311  MP3  MB334  31-3A053-808-34  FDP3  

See all the DS30 plugs, receptacles, handles, boxes, angles, specialty pawls, lockable inlets and receptacles and Spare parts, click on MELTRIC DS30.

800-929-2845
www.sordselectric.com

Switch Rated Plugs and Receptacles

Meltric's Decontactor Series products are a combination electrical plug and receptacle and disconnect switch in the same device. Decontactors are designed to allow users to safely make and break connections under full load even in overload and short circuit conditions. Protection from exposure to live parts and arc flash is ensured at all times during the operation of the device. Decontactors make it easy to provide plug & play connections for all your downtime critical equipment. They can be easily configured for use in a wide variety of applications such as for use as inline connectors/switches or they may be mounted on wall boxes, distribution panels or even directly on equipment.

ARC flash protection is a trademark of the Meltric product line. Decontactors are a combination plug, receptacle and disconnect switch. With Decontactors installed, workers can safely and easily make and break electrical connections under full load. The receptacle's dead front prevents access to live
parts and thus, exempts workers from needing to follow OSHA/NFPA 70E specified work procedures associated with performing energized electrical work. Drawing an arc during plug removal is an inherent hazard with traditional pin and sleeve and twist type devices. Meltric Decontactors are designed to eliminate this hazard by isolating the making and breaking of the contacts in enclosed arc chambers and by ensuring that the plug contacts are deenergized and isolated from live parts before the plug can be removed.

When a Decontactor's 'OFF' button is pushed, its spring-loaded operating mechanism instantly opens the contacts to break the circuit and ejects the plug to the 'OFF' position. The quick breaking of the contacts (15 milliseconds) minimizes arcing; any that does occur is safely contained within the arc chamber.

Dead Front Construction: Meltric Decontactors have a dead front design to protect users from accidental exposure to live parts and arcing. The dead front is accomplished with a safety shutter on the receptacle along with enclosed arc chambers and a skirted plug casing. Since there is no access to live parts, Meltric products simplify compliance to the NFPA 70E Standard for Electrical Safety in the Workplace.

Silver-Nickel Contacts : Meltric uses solid silver-nickel contact surfaces on almost all of its plug and receptacle product lines. The 85% silver/15% nickel composition of the contacts add the beneficial physical properties of nickel to the excellent electrical characteristics of silver.

This silver-nickel material provides significant advantages
over the brass materials used on most other types of plugs and receptacles.

Silver-nickel maintains its low contact resistance and superior electrical properties even after oxidation and tarnishing. Silver-nickel withstands arcing very well and only welds at extremely high pressure and temperature. Thanks to the influence of the nickel, silver-nickel provides excellent wear resistance. Silver-nickel performs wells in and withstands wet and corrosive environments.

Meltric Plugs come in 20, 30, 60, 100, 200, 250, 300, 600 amp versions. They come in plastic and metal housings and in NEMA 4 and Explosion Proof ratings. The switches can be cord mounted or mounted to a junction box.

Meltric makes multi-pin plugs, up to 37 pins and use of some pins can be for control. The order that the contacts mate is, Ground first, neutral, phases, and then auxiliary.

Meltric's most popular series is their DSN series in 20, 30 and 60 amp deContactors.

Other key benefits:

Simplify Code Compliance

Avoid Costs of disconnects

Reduce Change-Out Times

Website

Facebook