Mineral Insulated (MI) Band/Barrel Heaters
The MI band heater from Watlow® is a high-performance heater. The band heater's performance and name are derived from Watlow's exclusive mineral insulation—a material with much higher thermal conductivity than mica and hard ceramic insulators used in conventional heaters. A thin layer of the “high” thermally conductive MI material is used to electrically insulate the element wire from the inside diameter of the heater sheath. A thicker, “low” thermally conductive layer backs up the element wire directing the heat inward toward the part being heated.
High thermal conductivity of MI and low mass construction provides rapid response to temperature control and avoids thermal lag.
Operating temperatures up to 1400°F (760°C) allows safe melting of resins such as PEEK™, Teflon®, Ultem® and Zytel®
Higher watt densities contribute to faster heat-up and throughput for increased productivity
Stainless steel cover and side fold design resists contamination from overflow of plastic or other free-flowing materials
Attached clamp bars eliminates cumbersome clamping straps, making installation easier
Applications and Technical Data
General Limitations
• Maximum width of 1 in. (25 mm) diameter heater is 11/2 in. wide (38 mm)
• Maximum heater width: 2x heater diameter
• Minimum I.D. for Type B, C, E and H leads: 1 in. (25 mm)
• Minimum I.D. for Type B—90° leads: 11/8 in. (29 mm)
• Maximum lead amperes: 12.5A per pair
• SLE maximum: 17.0A
• Maximum amperes (post terminals): 30A per pair
• Minimum diameter and width for SLE: 4 in. x 11/2 in. (102 x 38 mm) width
• 90° leads not available over 250VAC
• Minimum I.D. for post terminals: 11/4 in. (32 mm)
Gaps
• ≤ 3 in. = 1/8 in. nominal
• 3 in. ≤ 6 in. = 1/4 in. nominal ±1/8 in.
• 6 in. ≤14 in. = 3/8 in. nominal ±1/8 in.
• >14 in. = 1/2 in. nominal ±1/4 in.
MB1A1AN1
MB1A1AN2
MB1A1AN3
MB1A1AN4
MB1A1JN1
MB1A1JN2
MB1A1JN3
MB1A1JN4
MB1A1JN5
MB2A1JN1
MB1E1AN2
MB1E1AN3
MB1E1JN1
MB1E1JN2
MB1E1JN3
MB1J1AN1
MB1J1AN2
MB1J1AN3
MB1J1AN4
MB1J1AN5
MB1J1JN1
MB1J1JN2
MB1J1JN3
MB1J1JN4
MB1J1JP4
MB1J1JP6
MB1J2AN1
MB1J2AN2
MB1J2AN3
MB1J3AN1
MB1J3AN2
MB1J3AN3
MB1N1GX3A
MB1N1JN1
MB1N1JN2
MB1N1JN3
MB1N2AN1
MB2A1AN1
MB2A1AN2
MB2A1AN3
MB2A1AX6B
MB2A1JN1
MB2A1JN2
MB2A2AN1
MB2A2AN2
MB2A2AX2A
MB2E2AX7
MB2E2JN1
MB2J1AN1
MB2J1JN1
MB3A1AP1
MB3A1JP1
ME3A1JP10
MB3J2AP2
ME3L1JP5
MB4A1AP1
MB4A1JP2
ME4A1JP11
ME4A1JP12
MB4J2JP1
ME5A1JP8
ME5E1JP9
ME5E3AP5
ME5E4JP2
ME5E4JP3
ME5J1JP1
ME6A1JP2
ME6J1JP5
ME6N1JP6
ME6N1JP7
ME6N4AP2
ME6N5AP3
ME6N6AP5
ME7A1JP4
ME7J1JP4
ME7L3AP1
ME8A1JP4
ME9A1JP1
ME9J3AP2
ME11E3AP2
Use our Contact Form HERE to get a quote on Watlow Band /Barrel Heaters
Sords Electric
216-765-4230
www.sordselectric.com
Band Heaters and Barrel Heaters from Watlow
No comments:
Post a Comment