Robertshaw Vibration Switches - Uniline Switches

2020
Schneider Electric Uni-Line Robertshaw Vibration Switches from Sords Electric

Buy Here!

The Robertshaw vibration switch is designed to protect rotating and reciprocating equipment against serious damage in the event malfunctions occur which maybe detected as an increase in vibration.  Both amplitude and frequency of vibrations as so that an increase over normal in either will actuate the vibration switch.  When the vibration level of a machine protected by a vibration switch exceeds normal by a preselected amount, an internal switch is actuated providing a shut down circuit before costly damage occurs.  An audible or visual warning system may also be wired into the switch to signal when the malfunction has occurred. Falling bearings, broken blades and similar malfunctions cause increased imbalance or high frequency vibrations, detachable with the Robertshaw vibration switch. The Robertshaw vibrations switch is designed for maintenance free service in permanent locations.

Two types of the vibration switch are available. The Robertshaw/Uniline 366 and 365/365A series.

The 366/6000-00 series are enclosed in a general purpose housing which meets weather resistant NEMA 4 specifications.
The Uni-Line/Robertshaw 365A/6000-10 vibrations switch conforms to specifications for use in hazardous locations with a NEMA 7 housing the meets Class 1, Groups C and D and Class 2, Groups E, F and G hazardous area classifications.

The difference in the switch part numbers are the RESET coil voltage and either SPDT OR DPDT switches. Note: All switches can be manually reset after a fault.

366 series switches - NEMA 4

366-A2  or  Uni-line P/N 6000-002 - SPDT, 24 vdc reset
366-A4  or  Uni-line P/N 6000-004 - SPDT, 48 vdc reset
366-A8  or  Uni-line P/N 6000-005 - SPDT, 117 AC/VDC reset

366-D2  or  Uni-line P/N 6000-007 - DPDT, 24 vdc reset
366-D4  or  Uni-line P/N 6000-008 - DPDT, 48 vdc reset
366-D8  or  Uni-line P/N 6000-009 - DPDT, 117 AC/VDC reset

Buy Here!

365A series switches - Hazardous rated Explosion Proof Housing

365A-A2  or  Uniline P/N 6000-102 - SPDT, 24 vdc reset
365A-A4  or  Uniline P/N 6000-104 - SPDT, 48 vdc reset
365A-A8  or  Uniline P/N 6000-105 - SPDT, 117 AC/VDC reset

365A-D2  or  Uniline P/N 6000-107 - DPDT, 24 vdc reset
365A-D4  or  Uniline P/N 6000-108 - DPDT, 48 vdc reset
365A-D8  or  Uniline P/N 6000-109 - DPDT, 117 AC/VDC reset

Buy Here!

NOTE: The Robertshaw 365 series Vibration switch is now the Robertshaw 365A series Vibration switch with updated internals.
It has the same Form, Fit and Function.

To get a quote, please use our CONTACT US page.

Range - 0 to 4.5G
Accuracy -  ~5% of full range up to 300 Hz
Contact Rating -
  7 amp max., 460V AC Max., 50/60 Hz resistive load
  .5 Amp Max. 120VDC Max. resistive load
  1 Amp Max. 48VDC Max. resistive load
  2 Amp Max. 24VDC Max. resistive load
  5 Amp Max. 12VDC Max. resistive load
  5 amp max., 240V AC Max., 50/60 Hz resistive load DPDT
Temperature Limits -= -40ºF - 200ºF
Weight is 2.5 pounds for NEMA 4 and 6 pounds for Explosion-Proof housing units

Buy Here!

Sords Electric
Cleveland Ohio
216-765-4230
www.sordselectric.com

Schneider Electric Robertshaw Uni-Line Vibration Switches

Robertshaw 365A Vibration Switch

2020
Sords Electric Sells the Robertshaw Industrial Products 365A Explosion Proof Vibraswitch

By Robertshaw Vibration Switches HERE.

The 365A series Vibration Switch is the standard of the industry for Vibration Detection. The Robertshaw Switch is based on acceleration to detect vibration and shut of machinery before a catastrophic disaster.

The 365A malfunction detector provides maximum protection for large motors, pumps, compressors and the types of rotating or reciprocating equipment by responding to mechanical malfunctions the instant they occur. The 365A is UL, and c-UL certified Explosion Proof, type 4/4X and IP66 Weatherproof and ATEX certified (E365A).
Features

- Acceleration sensitive-measures total destructive shock
- SPDT ot DPDT contact options (A or D Models)
----7 Amps max, 460 VAC Max, 50/60 Hz on"A" versions
----5 Amps max, 240 VAC Max, 50/60 Hz on"D" versions
- Optional Gold contacts for low voltage/current operation
- Adjustable set point range 0G to 4.5G
---- 0-4.5 G when mounted Horizontally
---- 0-3.5 G when mounted Vertically
- Local or electric remote Reset
- Optional Space Heater to prevent condensation
- Explosion-Proof weatherproof enclosure

Installed 365A Switch

The Model 365A and #365A Vibraswitches empty a magnetic circuit opposed by inertial and adjustable spring forces in the actuation mechanism. Operation of the Vibraswitches is as follows:
The armature is constrained so as to respond to only one direction of movement by frictionless flexure pivot compost of two overlapping blocks and a leaf spring leaded in one direction to hold the blocks together.  The armature totals on the pivot being forced in one direction by the adjusting spring force and the other direction by the magnetic force.
Then the entire assembly is subjected to vibration perpendicular to the base, the peak acceleration times the effective mass of the rmatureproduces an inertial force, aided be the adjustable spring tending to pull the armature away from the stop pin and the restraining force of the magnet.  When the peak acceleration exceeds the set point level the armature leaves the stop pin, increasing the gap and decreasing the force with the armature continuing to move up until it reaches the latch magnet, actuating the switch during its upward travel.
RESET is done by depressing the RESET button or applying power to the electrical reset coil.

Robertshaw 365A Vibration Switch

Enclosure Classifications
Class I, Divison 1, Group B,C, D
Class II, Division 1, Group E, F & G

Robertshaw 365A-A8 Name Plate (2018)

Robertshaw 365A-A8
120 volt AC reset Coil, SPDT Contacts

Robertshaw 365A-D8
120 volt AC reset Coil, DPDT Contacts

Robertshaw 365A-A2
24 volt DC reset Coil, SPDT Contacts

Robertshaw 365A-D2
24 volt DC reset Coil, DPDT Contacts

Robertshaw 365A-A3
240 volt AC reset Coil, SPDT Contacts

Robertshaw 365A-D3
240 volt AC reset Coil, DPDT Contacts

Robertshaw 365A-A4
48 volt DC reset Coil, SPDT Contacts

Robertshaw 365A-D4
48 volt DC reset Coil, DPDT Contacts

Robertshaw 365A-A7
120 volt DC reset Coil, SPDT Contacts

Robertshaw 365A-D7
120 volt DC reset Coil, DPDT Contacts


Please note that the Robertshaw Industrial Products is now part of Schneider Electric.

Sords Electric
Cleveland, Ohio
216-765-4230
www.sordselectric.com

2020 Vibration Robertshaw Schneider...2020 Vibration Robertshaw Schneider...2020 Vibration Robertshaw Schneider  

Robertshaw Vibration Switches for Machine and Fan Protection

Sords Electric Sells Robertshaw Vibration Switches and Transducers

Use our CONTACT FORM for a Robertshaw Vibration Quote.

with Vibration Switches you Can:
Avoid Catastrophic Failures
Reduce Downtime
Improve Maintenance

Robertshaw Model 366 switches are NEMA 4 rated
Robertshaw Model 365A Switches are Explosion Proof
Robertshaw EURO366 are ATEX approved
All switches measure up to 4 Gs.
No mercury in the switches and they last a lifetime.

Contact Sords Electric
800-929-2845

366A8  120 volt reset with SPDT switch - Nema 4
365A-A8 120 volt reset with SPDT switch - Nema 7
366D8  120 volt reset with DPDT switch - Nema 4
365A-D8 120 volt reset with DPDT switch - Nema 7

366-A8...366-D8...365-A8...365-D8...366-A8...366-D8...365-A8...365-D8

Robertshaw EURO Vibra Switches

Robertshaw Euro Style Vibration Switches from Sords Electric

The Robertshaw EURO 366GA8 Vibraswitch malfunction detectors provide maximum protection for large motors, pumps, compressors and other rotating or reciprocating equipment by responding to mechanical malfunctions the instant they occur.

Robertshaw Euro 366 ATEX Vibration Switch

The EURO366 Vibraswitch malfunction detector provides maximum protection from rotating and reciprocating of large motors, pumps or compressors. It is intended for indoor or outdoor use in hazardous or non-hazardous areas with ATEX and CE certifications.

Other features include:

Flame Proof (Explosion Proof) - EEx d II B/C T6 IP66 T85°c - CESI03ATEX

Self Powered - No external power necessary

Adjustable set point range 0G to 4.5G

Local or electric remote reset

Minimum Maintenance - No moving parts except when set-point is exceeded

Optional space heater to prevent condensation

AC or DC reset coil options

Robertshaw EURO 366GA8 IP65 Vibration Switch, 120vac Remote Reset Coil, ATEX approved

Robertshaw EURO 366GA2 IP65 Vibration Switch, 24vdc Remote Reset Coil, ATEX approved

Robertshaw EURO 366GA7 IP65 Vibration Switch, 120vdc Remote Reset Coil, ATEX approved

Robertshaw Euro 366G

The EURO366G Vibraswitch malfunction detector provides maximum protection from rotating and reciprocating of large motors, pumps or compressors. It is intended for indoor or outdoor use in hazardous or non-hazardous areas with ATEX and CE certifications.

Other features include:

Flame Proof (Explosion Proof) - EEx d II B/C TC IP66 T85°c CESI 03 ATEX

Robertshaw EURO 366GA0 IP65 Vibration Switch, No Reset Coil, ATEX approved

Robertshaw EURO 366GD8 IP65 Vibration Switch, 120vac Remote Reset Coil, ATEX approved, DPDT

Robertshaw EURO 366GD9 IP65 Vibration Switch, 240vdc Remote Reset Coil, ATEX approved, DPDT

Please use our contact us page for Quotations and Information Requests

Please call 216-765-4230 to speak with a representative.

www.sordselectric.com

Robertshaw ATEX vibration  Robertshaw ATEX vibration  Robertshaw ATEX vibration  Robertshaw ATEX vibration

Robertshaw Selection Guide for Vibration Switches

Industrial Vibration Switches from Robertshaw ~ Selection Guide

Buy Robertshaw Vibration Products HERE!

Robertshaw Vibration Instruments can be used on rotating or reciprocating machines. To select the proper instrument for your machine, follow the steps below.

1. Select the unit that meets the environmental conditions that your machine is located in [hazardous area (explosion-proof or I.S.) or non-hazardous; temperature range].
2. Select the power supply and/or remote reset voltage required.
3. Select the unit that provides you with the required measurement type, range and frequency for your machine. The type would be acceleration (G's) or velocity (IPS). The range would be the G range or IPS range. The frequency would be in Hertz (RPM of machine ÷ 60).
4. If you require time delays (Start, Monitor or Start & Monitor delays – see note below), select the instrument that offers that feature. Models 375A/376A series offer fixed time delays; Model 566 offers adjustable Monitor Delay; Model 563A MUST BE used with Vibraswitch Model 366 or 365, and provides adjustable time delay for the units that are connected to the 563A Monitor. If time delay is not required proceed to step 5 below.
5. Select the function that you desire:
   1. Alarm or shut down only by:
      1. Electrical SPDT or DPDT Switch Operation (Models 365/366, Models 375A/376A with Start Delay Only).
      2. Solid State Triac Switch Operation (Models 375A/376A except for Start Delay ONLY Model which has SPDT Switch Contacts).
      3. Pneumatic Operation (Model 368).
   2. 4-20 mADC output only (Models 570B/571A).
   3. 4-20 mADC output with alarm and/or shut down contacts, triac outputs (Model 566).
6. Check to see if the Model selected above has a mounting configuration suitable for your application. All units are surface mount except for the following:
   1. Models 570B/571A are stud mount.
   2. Model 563A Monitor is used with the surface mount 365/366 Vibraswitches to provide adjustable start and monitor time delays.
7. After you have made your selection, review the complete Product Specification Sheet to verify your selection is correct.
   
   
   NOTE:
   Start, Monitor, or Start & Monitor Delays are used to prevent unwanted shut down or alarm during start-up or normal operation of your machine.
1. Start Delay: Prevents unwanted shut down when excessive vibration exists (which exceeds the set-point of the vibration switch or monitor) during the start-up of the machine.
2. Monitor Delay: Prevents unwanted shut down when short excessive vibration spikes occur (which exceed the set-point of the vibration switch or monitor) during normal operation of the machine. Spikes are typically caused by detonation, cavitation, other machinery in the immediate area, etc.

Sords Electric Sells Robertshaw Vibration Switches

216-765-4230
Sords Electric