Carlo Gavazzi WSS/WSM Wireless Safety System

Sords Electric and Carlo Gavazzi can provide Wireless Industrial door safety System.

Carlo Gavazzi has launched our new Wireless Safety System (WSS / WSM) for industrial automatic doors. The system eliminates the spiral cables between door and door controller, eliminating a weak point in traditional door protection systems.

The WSS / WSM System consists of a main controller (WSM), subcontroller (WSS), and photoelectric safety edge sensors (PB11), and is also compatible with many other safety edge products already on the market. An operating range of 10m (33 ft) between the main controller and subcontroller allows use on large doors.

Each main controller can control up to four subcontrollers. Each subcontroller in turn can monitor two safety edges, or one safety edge and one door-in-door sensor. Thus a total of up to eight doors can be monitored by a single main controller. They are ideally suited for large multi-door warehouses and distribution centers. The main controller is connected to the safety input of the main door or gate control panel which operates the doors. The wireless subcontroller is powered by one to four batteries (user can determine how many batteries they wish to use), for extended operation time of over one year.

The controllers and subcontrollers are fully synchronized and multiplexed, operating on 16 different channels, so no crosstalk interference can occur amongst individual sensors. The system meets all relevant global standards, and complies with all FCC and Canada IC regulations, with cUL and CE approvals for assurance of high quality and safety.

Wireless Entrapment Protection Device (EPD) for Industrial Doors. The system is designed to replace the connection cable between the ESPE (electro-sensitive protective equipment) and the door controller. The sub controller has input for either N.C. ESPE, N.O. 8.2 kΩ ESPE or the Carlo Gavazzi low consumption photoelectric ESPE N.C. contact. The system is designed for high reliability using 2.4 GHz duplex communication between the main controller and sub controller. The main controller can handle up to 4 sub modules i.e. one system can handle 8 ESPEs. The sub controller is activated by a test signal from the main controller and stays active during the period of time set at the main controller up to 80 seconds.

• Wireless Entrapment Protection Device for Industrial Doors

• Input for two ESPE (electro-sensitive protective equipment)

• Replaces cable between Door controller and ESPE 

• Input for door-in-door sensor 

• Output ESPE: 1 x SPST NC, 1 x SPST NO (8,2kΩ) • Output low battery: 1 x SPST NC contact

• 2,4 GHz duplex communication 

• Built-in antenna 

• IP66 ratings

Main Controller  WSM 2 B A 2 D24

Sub Controller   WSS 2 B A 2 BAT

Emitter    PB 11 CNT 15 WE

Receiver  PB 11 CNT 15 WR

Call Sords Electric at 216-765-4230 for more information or to order or use our Contact form HERE!
www.sordselectric.com
info@sordselectric.com