Toshiba S11 Drive Adapters

Toshiba S11 Adjustable Speed Drives from Sords Electric 

Optional Conduit Adapters and Dynamic Braking assemblies

Conduit adapters are mounted below the power terminal strips and replace the plastic plate provided with the drive.

Conduit adapters provide mechanical strength and a location for a conduit connector.

This allows wall‐mounting of the S11 where NEMA 1 standards must be met.

The height of the S11 will increase with the addition of the conduit adapter.

Example Part Number :  VFS11‐2004PM‐WN

	FRAME	S11
Adapter	SIZE	DRIVE
NEM110Z	A	2004, 2007
NEM111Z	A	2004, 2007
NEM120Z	B	2015, 2022, 4007, 4015, 6015
NEM121Z	C	2022, 2037, 4022, 4037, 6022, 6037
NEM130Z	C	2022, 2037, 4022, 4037, 6022, 6037
NEM140Z	D	2055, 2075, 4055, 4075, 6055, 6075
NEM150Z	E	2110, 2150, 4110, 4150, 6110, 6150

Please note that the Toshiba S11 Drive replace the Toshiba S9 Drive.
Single Phase S11 Drives have an S in the part number,  VFS11S-xxxxxx-WN

Dynamic Braking Packages for the S11 Drive.  Please call or email for quotes.

DYNAMIC BRAKING for Toshiba S11 Drives in NEMA 1 Enclosures
	HEAVY DUTY	Standard Duty
H P	230 VOLTS	230 VOLTS
0.5	S9‐PBR‐2004‐HD	S9‐PBR‐2004‐LD
1	S9‐PBR‐2004‐HD	S9‐PBR‐2004‐LD
2	S9‐PBR‐2007‐HD	S9‐PBR‐2007‐LD
3	S9‐PBR‐2022‐HD	S9‐PBR‐2022‐LD
5	S9‐PBR‐2022‐HD	S9‐PBR‐2037‐LD
7.5	S9‐PBR‐2022‐HD	S9‐PBR‐2055‐LD
10	S9‐PBR‐2022‐HD	S9‐PBR‐2055‐LD
15	S9‐PBR‐2022‐HD	S9‐PBR‐2110‐LD
20	S9‐PBR‐2022‐HD	S9‐PBR‐2110‐LD
	460 VOLTS	460 VOLTS
1	S9‐PBR‐4007‐HD	S9‐PBR‐4007‐LD
2	S9‐PBR‐4022‐HD	S9‐PBR‐4022‐LD
3	S9‐PBR‐4022‐HD	S9‐PBR‐4022‐LD
5	S9‐PBR‐4022‐HD	S9‐PBR‐4022‐LD
7.5	S9‐PBR‐4055‐HD	S9‐PBR‐4055‐LD
10	S9‐PBR‐4055‐HD	S9‐PBR‐4055‐LD
15	S9‐PBR‐4110‐HD	S9‐PBR‐4110‐LD
20	S9‐PBR‐4110‐HD	S9‐PBR‐4110‐LD
	600 VOLTS	600 VOLTS
2	S5‐PBR5120‐HD	S5‐PBR5120‐LD
3	S5‐PBR5120‐HD	S5‐PBR5120‐LD
5	S5‐PBR5160‐HD	S5‐PBR5160‐LD
7.5	S5‐PBR5220‐HD	S5‐PBR5220‐LD
10	S5‐PBR5270‐HD	S5‐PBR5270‐LD
15	S5‐PBR5270‐HD	S5‐PBR5270‐LD
20	S5‐PBR5270‐HD	S5‐PBR5270‐LD

Sords Electric can quote on most Toshiba Drives, including the New Toshiba P9 drive for Pumps, the AS1 drive, the G9 drive and GX7 drive

www.sordselectric.com
800-929-2845
CONTACT FORM

Toshiba S11 Micro Drives

The Toshiba S11 Adjustable Speed Drive is the next generation of micro drives. The S11 provides maximum torque with precise speed control. It features an easy-to-use, quiet and compact design. A removable terminal board, larger terminals, bidirectional speed search and PID control are just a few features that make this drive stand out against other micro drives. No other micro drive delivers such reliable performance and extensive capabilities at such a competitive price.

************ NOTE ~ NOTE ************

THE S11 DRIVE HAS BEEN REPLACED BY THE   S 15 TOSHIBA   MICRO DRIVE AS OF JANUARY 2013.  Some S11's remain but Toshiba is only manufacturing the S15 DRIVE.  The S15 comes in a standard version and a premium version. Visit our web site for both versions.

************ NOTE ~ NOTE ************

Voltage Regulation	Adjustable within the range of 50-600V by correcting the supply voltage (not adjustable above the input voltage)
PWM Carrier Frequency	Adjustable between 2.0KHz-16KHz. (default 12 KHz/current derate applies above 4KHz)
Control System	Sine Wave PWM System
V/Hz Pattern	Open Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost, automatic energy saving, dynamic automatic energy saving, PM motor control, Auto Tuning, Base Frequency 25-500Hz, Torque Boost 0-30%; Start Frequency .5-10Hz
Overload Rating	150% for 60 seconds, 200% for .5 second
Frequency Setting	Potentiometer and Digital Input on Front Panel, Remote Potentiometer (1-10KOhms), 0-10Vdc (input impedance VIA/VIB=30KOhm), 4-20mAdc (input impedance 250 Ohm, 15 preset speeds by contact closure)
Frequency Precision	Analog Input ±0.5% of the Maximum Output Frequency, Digital Input ±0.01% of the Maximum Output Frequency
Frequency Command Resolution	0.01Hz Operation Panel, 0.1Hz Analog Input
Output Frequency Range	0.5-500Hz (default 0.5 -80Hz, maximum frequency 30-500Hz)
Frequency Jump	3 Frequencies with Adjustable Range
PID Control	Proportional Gain, Integral Gain and Differential Gain Settings and Control Wait Time
Upper and Lower Limit Frequencies	Upper Limit Frequency: 0 to max frequency, Lower Limit Frequency: 0 to upper limit frequency
Input Terminals	8 input terminals programmable to 65 functions. Logic selectable between sink and source.
Analog Inputs	(1) 4-20mA, (1) 0-10V or 1-10KOhm Potentiometer Connections
Output Contacts	1 Open Collector and 1 Relay contact programmable to 58 functions.
Analog Output	1mA / 7.5Vdc or switch selectable to 0-20mA (4-20mA), programmable to 19 functions
Power Terminals	Input (L1, L2, L3), Output (T1, T2, T3), DCL (PO, PA), DBR (PA, PB), DC BUS (PA, PC)
Protective Functions	Stall Prevention, Current Limitation, Output Short Circuit, Overvoltage, Overvoltage Limitation, Undervoltage, Ground Fault, Power Supply Phase Failure, Output Phase Failure, Overload Protection, Overcurrent at Startup, Overtorque, Undercurrent, Overheat, Cumulative Operation Time, Life Alarm, Emergency Stop, Braking Resistor Overload, Various Pre-alarms
Retry	ASD can automatically clear fault upon trip. Programmable to 10 times with wait time up to 10 seconds between retry.
Restart	ASD will smoothly catch a freewheeling motor.
Ambient	Temperature: -10-50°C, 14-122°F. Humidity 93% non-condensing
Installation	NEMA 1/IP20 (enclosed type)
LED Indications	Run, Monitor Mode, Program Mode, % and Hz Indication, Frequency Setting Mode by Potentiometer or Up/Down Keys, DC Bus Capacitors Charged
Monitoring	Operation Frequency, Operation Frequency Command, Forward/Reverse Run, Output Current, Voltage in DC Section, Output Voltage, Torque, Torque Current, Drive Load , DBR Load, Input Power, Output Power, Monitor of Input and Output Terminals, CPU and Memory Versions, PID Feedback and Frequency Command, Rated Current, Past Trips 1-4, Parts Replacement Alarm, Cumulative Run Time
Selectable Display Units	Current and voltage display selectable between Amps/Volts or % along with scaling factor multiplier.

S9 to S 11 cross reference

TOSHIBA S9 H.P. Volts / Phase TOSHIBA S11

VF S9-2004PL-WN 1/2 230 / 1 and 3 phase - VF S11-2004PL-WN

VF S9-2007PL-WN 1 230 / 1 and 3 phase - VF S11-2007PL-WN

VF S9-2015PL-WN 2 230 / 1 and 3 phase - VF S11-2015PL-WN

VF S9-2022PL-WN 3 230 / 1 and 3 phase - VF S11-2022PL-WN

VF S9-2004PM-WN 1/2 230 / 3 and 3 phase - VF S11-2004PM-WN

VF S9-2007PM-WN 1 230 / 3 and 3 phase - VF S11-2007PM-WN

VF S9-2015PM-WN 2 230 / 3 and 3 phase - VF S11-2015PM-WN      In Stock as of 2/22/2014

VF S9-2022PM-WN 3 230 / 3 and 3 phase - VF S11-2022PM-WN

VF S9-2037PM-WN 5 230 / 3 and 3 phase - VF S11-2037PM-WN

VF S9-2055PL-WN 7 1/2 230 / 3 and 3 phase - VF S11-2055PM-WN

VF S9-2075PM-WN 10 230 / 3 and 3 phase - VF S11-2075PM-WN    In Stock as of 2/22/2014

VF S9-2110PM-WN 15 230 / 3 and 3 phase - VF S11-2110PM-WN    In Stock as of 2/22/2014

VF S9-2150PM-WN 20 230 / 3 and 3 phase - VF S11-2150PM-WN

VF S9-4007PL-WN 1 460 / 3 and 3 phase -  VF S11-4007PL-WN        In Stock as of 2/22/2014

VF S9-4015PL-WN 2 460 / 3 and 3 phase - VF S11-4015PL-WN

VF S9-4022PL-WN 3 460 / 3 and 3 phase - VF S11-4022PL-WN

VF S9-4037PL-WN 5 460 / 3 and 3 phase - VF S11-4037PL-WN

VF S9-4055PL-WN 7 1/2 460 / 3 and 3 phase - VF S11-4055PL-WN   In Stock as of 2/22/2014

VF S9-4075PL-WN 10 460 / 3 and 3 phase - VF S11-4075PL-WN

VF S9-4110PL-WN 15 460 / 3 and 3 phase - VF S11-4110PL-WN

VF S9-4150PL-WN 20 460 / 3 and 3 phase - VF S11-4150PL-WN

In Stock as of February 2014: 
TOSHIBA S9-2022PM-WN
TOSHIBA S9-4055PL-WN

Also review the new Toshiba P9 Drive / Inverter designed for Pump use.

See the product on our Sords Electric web site.

800-929-2845 and ask for Syd our Drives expert.