Door Controls by Carlo Gavazzi

Sords Electric Carlo Gavazzi Distributor

February 7, 2012 - Buffalo Grove, IL – Carlo Gavazzi has launched our new Wireless Safety System (WSS / WSM) for industrial automatic doors. The system eliminates the spiral cables between door and door controller, eliminating a weak point in traditional door protection systems.

The WSS / WSM System consists of a main controller (WSM), subcontroller (WSS), and photoelectric safety edge sensors (PB11), and is also compatible with many other safety edge products already on the market. An operating range of 10m (33 ft) between the main controller and subcontroller allows use on large doors.

Each main controller can control up to four subcontrollers. Each subcontroller in turn can monitor two safety edges, or one safety edge and one door-in-door sensor. Thus a total of up to eight doors can be monitored by a single main controller. They are ideally suited for large multi-door warehouses and distribution centers. The main controller is connected to the safety input of the main door or gate control panel which operates the doors. The wireless subcontroller is powered by one to four batteries (user can determine how many batteries they wish to use), for extended operation time of over one year.

The controllers and subcontrollers are fully synchronized and multiplexed, operating on 16 different channels, so no crosstalk interference can occur amongst individual sensors. The system meets all relevant global standards, and complies with all FCC and Canada IC regulations, with cUL and CE approvals for assurance of high quality and safety.

Available at Sords Electric

Use our Carlo Gavazzi Parts Form

WSM 2 B A 2 D24 WSM2BA2D24

WSS 2 B A 2 BAT

WSS2BA2BAT

PB 11 CNT 15 WR

PB11CNT15WR

PB 11 CNT 15 WE

PB11CNT15WE

Wireless Entrapment Protection Device (EPD) for Industrial Doors. The system is designed to replace the con- nection cable between the ESPE (electro-sensitive pro- tective equipment) and the door controller. The sub con- troller has input for either N.C. ESPE, N.O. 8.2 kΩ ESPE or the Carlo Gavazzi low consumption photoelectric ESPE N.C. contact. The system is seconds. designed for high reliability

The sub controller is activated by a test signal from the main controller and stays active during the period of time set at the main controller up to 80

using 2.4 GHz duplex com- munication between the main controller and sub controller. The main controller can handle up to 4 sub modules i.e. one system can handle 8 ESPEs.

tion Device (EPD) for Industrial Doors. The system is designed to replace the con- nection cable between the ESPE (electro-sensitive pro- tective equipment) and the door controller. The sub con- troller has input for either N.C. ESPE, N.O. 8.2 kΩ ESPE or the Carlo Gavazzi low con- sumption photoelectric ESPE N.C. contact. The system is seconds. designed for high reliability

216-765-4230