Brisk Heat Heating Cable

FE General Purpose Constant-Wattage Heating Cable

Product Highlights

Temperatures up to 400^oF (204^oC)

Power remains constant regardless of temperature

Can be cut-to-length at job site

Ideal for a wide range of general purpose applications

• Mid-range process temperature control for food and chemical processing
• Water lines
• Fire protection systems
• Fuel oil
• Condensate return
• Hot water lines
• Lines periodically purged with 250 psig steam

Specifications

• Maximum exposure temperature is 400^oF (204^oC)
• Moisture, chemical, flame, and radiation resistant
• 12AWG bus wires
• Dimensions 0.2" x 0.3" (5 x 8mm)
• 40 lb. (18kg) per 500-foot (152m) spool

TEFLON^® is a registered Trademark of DuPont used under license.

Approvals

Ordinary Locations
Hazardous Location (T3 rated):
Class I Division 2 Groups B, C, D
Class II Division 2 Groups F, G
Class III Division 2

Ordinary locations (120 and 240VAC only)

Approval valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.

Maximum Circuit Length in ft (m)

Cable	120VAC	208VAC	240VAC	277VAC	480VAC
3 watts / ft (10 watts / m)	360 (110)	625 (191)	720 (220)	N/A	1440 (439)
5 watts / ft (16 watts / m)	275 (84)	477 (145)	550 (168)	N/A	1100 (335)
8 watts / ft (26 watts / m)	220 (67)	381 (116)	440 (134)	508 (155)	880 (268)
12 watts / ft (39 watts / m)	180 (55)	312 (95)	360 (110)	416 (127)	720 (220)

Circuit Module Length in ft (m)

Cable	120VAC	208VAC	240VAC	277VAC	480VAC
3 watts / ft (10 watts / m)	2.0 (0.6)	4.0 (1.2)	4.0 (1.2)	N/A	8.0 (2.4)
5 watts / ft (16 watts / m)	2.0 (0.6)	4.0 (1.2)	3.0 (0.9)	N/A	6.0 (1.8)
8 watts / ft (26 watts / m)	2.0 (0.6)	4.0 (1.2)	4.0 (1.2)	4.0 (1.2)	6.0 (1.8)
12 watts / ft (39 watts / m)	2.0 (0.6)	6.0 (1.8)	360 (110)	4.0 (1.2)	4.0 (1.2)

Note: when ordering, please allow a minimum of 1 module length extra for terminations.

Part Number Matrix

Click on the part number below for more information or to order.

FECAB 3 120 B

FECAB 3 208 B

FECAB 3 240 B

FECAB 3 480 B

FECAB 3 120 SS

FECAB 3 208 SS

FECAB 3 240 SS

FECAB 3 480 SS

FECAB 5 120 B

FECAB 5 208 B

FECAB 5 240 B

FECAB 5 480 B

FECAB 5 120 SS

FECAB 5 208 SS

FECAB 5 240 SS

FECAB 5 480 SS

FECAB 8 120 B

FECAB 8 208 B

FECAB 8 240 B

FECAB 8 480 B

FECAB 8 120 SS

FECAB 8 208 SS

FECAB 8 240 SS

FECAB 8 480 SS

FECAB 12 120 B

FECAB 12 208 B

FECAB 12 240 B

FECAB 12 480 B

FECAB 12 120 SS

FECAB 12 208 SS

FECAB 12 240 SS

FECAB 12 480 SS

Accessories:

Brisk Heat Universal Connection / Termination Kit

1-1” NPT Pipe standoff

2-Ring terminals

3-Wire nuts

2-Crimp barrels

3-Lead pouches

2-End pouches

1-Caution label

6-Shrink tubes

1- Panhead screw

1-3 oz. tube RTV sealant

2- Pipe straps

Brisk Heat Lead / End Seal Kit for Constant Wattage Cable

5-Lead pouches

5-End pouches

10-Shrink tubes

Brisk Heat Splice Kit

3-Lead pouches

3-Shrink tubes

3-Crimp barrels

3-Ring terminals

1-3 oz. Tube RTV sealant

1-Caution label

1-End pouch

Brisk Heat Lead Pouch

1-Lead pouch

1-Shrink tube

216-765-4230

www.sordselectric.com