Thursday, May 31, 2018

MDI Mercury 35 amp Contactors

Mercury Displacement Industries 35 AMP Contactors

Buy here on Sords Electric

Mercury Displacement Relays are all designed and built to meet the most exacting demands of industry. They have won their high place in the electrical field by doing the tough and tricky jobs that ordinary equipment could at best do in an uncertain manner. They have proved their ability to stand up under the most adverse conditions of temperature, dust and moisture, in all types of applications.
The MDI Mercury normally closed contactors are designed and manufactured to high quality specifications and the contactors are commonly used in various heating, lighting, and many other industrial applications including high voltage ultraviolet type loads. The contacts are encased in hermetically sealed stainless steel tubes to provide reliable switching for millions of operations. MDI has manufactured this contactor since 1975. It is available in the single, two, three & four pole models.

Mercury contactors are NOT heat sensitive.  They can operate where others contactors cannot.

MDI Mercury Contactor









The Contactors come in single pole, dual pole, three pole and four pole styles.
Coil voltages are: 
24vac, 120vac, 208vac, 220vac, 277vac, 480vac,
6vdc, 12vdc, 24vdc, 48vdc, 125vdc, 250vdc

  • Operate Time: 50 milliseconds
  • Release Time: 80 milliseconds
  • Contacts:
    • 35 AMP @ 600 VAC Resistive
      • or
    • 35 AMP @ 480 VAC General Purpose
  • Contact Resistance: .003 ohm
    • After Cycling Under Load
  • Coil Terminals: #6 Binding Head Screws
  • Load Terminals: 4-14 AWG Compression Type
  • Dielectric Withstand: 2500 VAC RMS
  • Longevity: Millions of Cycles
  • Temperature Range: -35°C to 85°C

Most Popular units are the:

335NO120A - 3 pole 120 vac coil
35NO120A -  1 pole 120 vac coil
335NO24D -  3 pole 24 vdc coil
35NO24D  -   1 Pole 24 vdc coil


www.sordselectric.com
216-765-4230

No comments:

Post a Comment