Tuesday, November 28, 2017

Joslyn Clark Starters and Contactors

Electromechanical Contactors by Joslyn Clark and Sords Electric

Surplus never used Joslyn Clark Mechanical Contactors and Starters

BUY HERE



Joslyn Clark Contactor A77-309045A-3
A77-309045A-3 contactor. 25 HP on 480 volts 3 phase with a 24 vac coil voltage. Horse Power rating on 120 volts is 3HP, on 230 volts single phase is is 7.5HP and 10 HP on 230/3/60. Amps are 40 FLA and 50 resistive per pole. The NEAD number is 53803. CSA and UR listed.







Joslyn Clark Contactor HP10U03
10 HP rating on 480 volts 3 phase with a 24 vac coil voltage. Horse Power rating on 120 volts is 2HP, on 230 volts single phase is is 3HP and 7.5 HP on 230/3/60. Amps are 27 resistive per pole. NEMA size 1.NEAD number is 71316. CSA and UL listed.







Joslyn Clark Contactor HP05U03

5 HP rating on 480 volts 3 phase with a 24 vac coil voltage. Horse Power rating on 120 volts is 1HP, on 230 volts single phase is 2HP and 3 HP on 230/3/60. Amps are 18 resistive per pole. NEMA size 0. NEAD number is 70941. CSA and UL listed.




Joslyn Clark Contactor HP25U03
25 HP rating on 480 volts 3 phase with a 24 vac coil voltage. Horse Power rating on 120 volts is 3HP, on 230 volts single phase is 7.5HP and 10 HP on 230/3/60. Amps are 45 resistive per pole. NEMA size 2. NEAD number is 78450. CSA and UL listed.








CONTACT US


Sords Electric
216-765-4230

Tuesday, November 14, 2017

Watlow Firerod Cartridge Heaters in Stock

Sords Electric has the below heaters in stock from Watlow




Watlow Cartridge Heater G10A31-L12, 240 vac, 600 watts, (500w / 208 vac)
3/8 inch diameter and 10 inch length and 12 inch leads


Watlow Cartridge Heater G10A32-L12, 240 vac, 1000 watts, (830w / 208 vac) 
3/8 inch diameter and 10 inch length and 12 inch leads

216-765-4230
info@sordselectric.com

Thursday, October 12, 2017

Altech Pin and Sleeve Devices

Sords Electric Sells Altech Pin and Sleeve Devices

Contact Sords Electric HERE!

Altech’s line of industrial plugs and sockets also know as Pin and Sleeve devices, are manufactured by ABL Sursum, a company well known in Europe for its quality electrical products. This major manufacturer combines the elements of good design, high quality, safety, ease of installation and competitive cost. The pin and sleeve devices are manufactured to EN 60309 Part 1 and 2: IEC 60309. Their rugged construction properties and high resistance to aggressive industrial use.

In accordance with the Standard's requirements, these devices are color coded to provide positive voltage and frequency matching and external key-ways ensure correct alignment of contact pins. The position of the ground pin relative to the socket's key-way are designated as a clock hour position.
The ground terminal also has a larger diameter than the contacts, making it impossible to install it in an IEC 60309 device with a different voltage rating. The shrouded housing made of high impact nylon material protects the contacts from physical abuse and safeguards against touching live parts when partially engaged. All terminals are clearly marked in both IEC 60309 and North American Standards.

Altech Pin and Sleeve 480 volt Plug




Features include:
• High impact and abrasion resistance
• Resistant to oil, petrol, most acids and alkalines
• Operating Temperature range
-13°F to 176°F (-25°C to 80°C)
• Excellent anti-tracking
• Grooved body improves hand grip
• Insulated cable clamp device
• Maximum wiring space
• Terminals clearly marked
• All screws are accessible from one side







Assembly is simple and quick with the help of the multiramp
locking system. Parts are delivered in a half unlocked
stage to make initial assembly straightforward.
1. Match triangle icons for both housings in open position.
2. Twist counter-clockwise until locked.

Altech’s Pin and Sleeve devices are color coded to provide
positive voltage and frequency matching and external keyways
ensure correct alignment of contact pins. The
position of the ground pin relative to the socket's key-way
are designated as a clock hour position.
The ground terminal also has a larger diameter than the
contacts, making it impossible to install in an IEC 60309
device with a different voltage rating.

Altech Pin and Sleeve 250 volt Plug


Applications include:
Installation Companies
Plastic and metal processing
Machine Tools
Assembly Lines
Logistic Companies
Car Repair shops
Auto Manfacturing
Bakeries
Food Processing
Airports
Concert Venues




Sords Electric
216-765-4230

Wednesday, September 27, 2017

MDI Vertical Float Switches for Pump Operation

Sords Electric Sells Vertical Float Switches by MDI

BUY HERE.

The MDI Vertical Series Pump Switch. This switch has a snap action that is rated for 13 AMPS @ 120/240 VAC and 1/2 HP @ 120/240 VAC. This switch is very customizable and very durable. If you need a customized version of this switch please do not hesitate to contact Sords Electric.















Vertical Switches Features are as follows:
  • Ratings:
    • 13 AMPS @ 120/240 VAC
    • 1/2 HP @ 120/240 VAC
  • Cord Length:
    • 10' SJTOW/SJOW 16-2 AWG
  • Pumping Range:
    • Adjustable up to 6"
  • Materials:
    • Enclosure and guide is ABS plastic. Float black polypropylene.
  • Mounting:
    • Stainless Steel pipe mount bracket allows for mounting to standard size sump discharge piping. (Using standard mounting holes for #8 screws on 2.06" centers are located under the housing)
  • Operation:
    • Normally Open (Pump Down)

Sords Electric
216-765-4230
www.sordselectric.com


Monday, July 31, 2017

Payne Engineering Variable Voltage Controller 11DZ-2-30

Sords Electric has in Stock the Payne Engineering 11DZ-2-30 Controller

The Payne Engineering Variable Voltage Control 11DZ-2-30 can vary wattage of a resistance heating element by changing the voltage from 0-235 vac. The unit does require a 120 lot control circuit. In short this is a heavy duty dimmer switch. 1 piece is in stock.

Payne Engineering 11DZ230 Controller














The Payne 11DZ-2-30 is a 30 amp unit and can switch 120, 208, 230, and 240 volta VAC. The unit's dimensions are 4.25 x 4 x 3.875 inches. The 11DZ weighs 2.3 pounds.










Click HERE to view all of Sords Electric's overstock items.

Included are Payne Controllers, Continental Industries SSRs, Joslyn Clark Starters and contractors, Horner HMIs and Robertshaw Gas ignition controls.


216-765-4230

Payne Engineering Variable Controller

Sords Electric has Payne Engineering Controllers in Stock

Payne 18TBP-1-5 and 18TBP-2-5

















New and Unused Payne Variable Voltage controllers (Dimmer Switches) for electric heaters and other loads.  The Payne 18TBP-1-5 is a 120 volt variable voltage single phase controller able to handle up to 5 amps resistive. The output tis 0-118 volts. Max wattage is 600. Unit size is 2.5 x 2.5 x 2 inches.  7 units in stock as of 7/31/17
Single Phase, 120 VAC input, 0-118 VA output, 50/60Hz


New and Unused Payne Variable Voltage controllers (Dimmer Switches) for electric heaters and other loads.  The Payne 18TBP-2-5 is a 240 volt variable voltage single phase controller able to handle up to 5 amps resistive. The output tis 0-235 volts. Max wattage is 1200. Unit size is 2.5 x 2.5 x 2 inches. 1 unit is stock as of 7/31/17
Single Phase, 240 VAC input, 0-235 VA output, 50/60Hz
(Also for 208/220/230 VAC input)


Click HERE to view of of our Overstock items on Sords Electric.

Included are Payne Controllers, Continental Industries SSRs, Joslyn Clark Contactors and Starters and Robertshaw Gas Ignition controls.


216-765-4230
www.sordselectric.com

Friday, June 30, 2017

TRC Southwire 33120 Panel Mount GFCI

Sords Electric Sell the TRC (Technology Research Corp) 33120 Panel Mount GFCI

The small by mighty GFCI is designed to mount in a panel.  The 33120 GFCI has an automatic reset in case of a power outage  The GFCI will trip when it senses a 4-6mA leakage.  A manual reset is required after an actual Ground Fault is detected.

The TRC 33120 is a 20 amp GCI and rated for 120 volts. It has a Test button and a Reset Button.
Unit is 3.25 inches high x 2.16 inches deep and 2.35 inches wide.
GFCI response time is less than 25mS and trip level is 4-6 mA. 
Unit has a power on indication light.

To Buy Click HERE.


Unit Top is left with Buttons and unit bottom is right
TRC Model 33120 GFCI Panel Mount















Sords Electric
216-765-4230


Tuesday, May 2, 2017

Solid State Over Stock at Sords Electric

Sords Electric

The below Solid State Relays and Power Controllers parts are over stock

Payne Engineering  18TBP-1-5
120 volt solid state power SCR controller, 5 amps
Single Phase and 0-118 volt output











Payne Engineering  18TBP-2-5
208, 220, 240 volt solid state power SCR controller, 5 amps
Single Phase and 0-206, 0-218, 0-238 volt output











Payne 11DZ-2-30 SCR CONTROLLER
1 Phase, 30 amps 240 vac














Continental SSR RVA3-6V75T/H
75 amp Solid State Relay, three phase (30 amps max per phase).
120-280 vac input, 24-660 output with Din rail mount heat sink.














Continental SSR RSDA-660-30-3DO
30 Amp, three phase Solid State Relay
4-28 vdc input and 48-660 volt AC output
Din Rail Mount Heat Sink.













Continental SSR RVD3/6V75TL
75 amp Solid State Relay, three phase (30 amps max per phase).
4-32 vdc input, 24-660 output with Din rail mount heat sink.














Continental Hockey Puck SSR RSDC-DC-108-000
8 amp SSR for DC applications.
0-108 VDC output voltage (switching)
Unit comes with touch safe cover and screws in the box.














Sords Electric
CONTACT US

Burgess Saia Switches at Sords Electric

Sords Electric



Burgess, the inventor of the MicroSwitch, originally made in Gateshead England. The Company was bought out by Saia and now Johnson Electric still makes state of the art microswitches.

These switches are over stock.

Burgess Model GV32 10 amp at 125 volts and 5 amp at 250 volts.













Burgess QVCF9T 10 amp with with integral Push Button










Burgess Model BVMFYR-ULS mini microswitch with with roller
10 and at 250 VAC and 1/2 HPO 125/250 VAC










Burgess Model BVMF-ULS mini microswitch with with roller
10 and at 250 VAC and 1/2 HPO 125/250 VAC










Burgess Model BVM3FYR-ULS mini microswitch with with roller
10 and at 250 VAC and 1/2 HPO 125/250 VAC










Burgess P3 Switch
15 amp 125/250 VAC



Burgess/Saia PS 03 U11  Nema 4X Limit Switch
Also marked as FANAL.




















Contact Sords Electric

Sunday, April 30, 2017

Watlow Strip Heaters

Sords Electric Sells Watlow Strip Heaters

Watlow strip heater include their 375 Strip heater, their Finned Strip heater, single ended FINBAR strip heater  and the MI or mineral insulated strip heater.

Watlow Finned Strip Heater










Watlow 375 Style Strip Heaters
















Sords Electric
216-765-4230
info@sordselectric.com

Friday, March 31, 2017

ATC 339 Timer Delay Relay

Sords Electric Stock the Automatic Timing FM approved 339B TDR



An economical solid-state TDR with octal plug-in base, the 339 maintains excellent repeat accuracy despite wide voltage and temperature varia- tions. even after long periods of down-time. Two models are available. Each has six dial selected ranges from fractions of a second to as long as 10 hours. Each model has a selectable on-delay or interval timing mode.

WIDE CHOICE OF RANGES: In addition to the short ranges expected of an electronic TDR, the 339 is also available with ranges as long as 10 hours. An unusually versatile timer, the 339A has six dial-selected ranges—from 0.3 SEC to 3 hours or 1 SEC to 10 hours—and provides dial-adjustable timing periods between 0.075 seconds and 10 hours. A single 339 model thus accommodates the needs of a wide range of appli- cations, allowing the user to select easily and precisely—an appropriate range to permit optimum setting accuracy. The dial face automatically dis- plays the selected range.

CYCLE PROGRESS INDICATION: The 339’s LED annunciator provides a unique and effective method of cycle progress indication. Off before timing, the LED blinks at an ever-increasing rate as the cycle progresses; once every 3-1/2 seconds during the first 10% of the cycle, twice during the second 10%, and so on. At time-out, the LED stays on constantly, pulsing at a high rate. (In the 1 and 10 second ranges, the LED is off before timing, steady on during timing, and pulsing on after time-out.) 

HIGH ACCURACY: The 339’s timing circuit is not a simple RC circuit, but utilizes the sophistication of a proprietary integrated circuit that includes counting technology along with a stable oscillator to provide repeatable time delays.



MULTIPLE TIMING MODES: Every 339 can be used for either ON- delay or interval timing operation. The timing mode is selectable by a switch on the 339 housing.

The ATC 339B is FM approved or Factory Mutual for use with combustion systems.  Usually used as a purge timer.



















ATC 339B359Q2X
Six ranges, .3 or 3 Seconds, Minutes or Hours
120/60 voltage, 8 pin Octal Socket, Factory Mutual Approved-FM

ATC 339B200Q2X
Six ranges,  1 or 10 Seconds, Minutes or Hours
120/60 voltage, 8 pin Octal Socket, Factory Mutual Approved-FM

The ATC 339B Time delay relay can be ordered as well with 240 volts AC, 24 ACDC or 12 VDC

339B359R2X - 240 VAC
339B359T2X - 24 volts AC/DC
339B359E2X - 12 vdc

339B200R2X - 240 VAC
339B200T2X - 24 volts AC/DC
339B200E2X - 12 VDC




Sords Electric
216-765-4230
www.sordselectric.com










Tuesday, February 28, 2017

Carlo Gavazzi 3 Phase Monitoring

Sords Electric and Carlo Gavazzi  has new three phase monitoring Units



February 2017 - CARLO GAVAZZI is pleased to announce our new DPD Series Three-Phase Monitoring Relay with NFC Configuration. This 3-phase voltage and frequency monitoring relay provides the utmost flexibility in very compact dimensions, as it offers a wide range of features in a mere 22.5mm product width. It provides protection against phase reversal, phase loss and if the phase asymmetry, voltage or frequency measurements are not within the user-configured settings and/or thresholds.




The DPD Series settings can easily be modified through an Android App via a smartphone/tablet or via a USB NFC Reader/Writer (part number ACR1252U) connected to a computer. Under and over threshold settings can be set, as well as hysteresis and time delays. They are uploaded into the DPD Series by means of its NFC configuration. Neither potentiometer settings nor DIP switches are used for the device set-up, and after it is set-up, it can be password protected, to ensure safety while in use. The DPD02DM44B is delivered with default settings for North American 3-phase 240VAC mains; whereas the DPD02DM44 is delivered with European/Asian settings for 3-phase 400VAC mains.
The main advantage of the DPD Series is its high versatility and multifunction design. The set-up can be changed at any time and can be replicated, and stored on as many devices as needed. The set-points are extremely precise as they are digital, and much more accurate than they would be with potentiometer settings.
The DPD is widely considered a game-changer in monitoring relay technology, as the user can set up to ten alarm conditions, and then these alarms are combinable via AND / OR logic to provide up to two relay outputs. This combined with the NFC configuration establishes Carlo Gavazzi as the market leader in monitoring relays.
The DPD Series has been designed to provide a highly accurate solution for most 3-phase load applications. Its versatility makes it ideal for generator sets, power generators, and pumps/compressors applications in the Lift/Elevator, Escalator, Materials Handling, and HVAC markets. They are also an excellent off the shelf solution for any electrical distributor, wholesaler or panel builder.


Main technical features include:
3-phase voltage and frequency monitoring relay
Nominal measurement range from 177-552 VAC L-L and 102-318 VAC L-N
Star or Delta mains
NFC configuration
Adjustable set-points, hysteresis, delays, AND/OR logic
Three diagnostic LEDs
Operating frequency from 45 to 440Hz
Two independent SPDT 8 Amp outputs
cULus, CCC approved and CE marked