Tuesday, June 25, 2013

Toshiba Global EQP Motors

Sords Electric can provide the Global EQP Toshiba efficient Electric Motors

Toshiba's general purpose, totally enclosed fan cooled, EQP Global motor series is Toshiba's next-generation motor product line. This cutting-edge motor product line is designed to meet or exceed the competitive demands of the global market, as well as the requirements of the Energy Independence & Security Act of 2007 (EISA), while maintaining the high reliability and quality expected from Toshiba. 



Designed for severe duty applications and built on over 20 years of success with the Toshiba EQPIII motor series, the EQP Global SD features multiple new design enhancements that make it one of the lowest cost-of-ownership products in the industry. 


NEMA Premium® Efficiency (1 through 500 HP) 
Meets or Exceeds Energy Independence & Security Act of 2007 (EISA)
Addresses Global Motor Specifications Including CE, NEMA, & IEC
Dual-Frequency 50/60 Hz Design (50/60 Hz Listed on Nameplate on 1 though 75 HP)
Inverter-Duty Rated Multi-Mount on 140 Through 445 & N449 Frames
Cast Iron Conduit Box as Standard


Nameplate
• Stainless Steel 
• NEMA Premium® Design 
• Etched Lettering 
• Dual-Frequency 50/60 Hz on Nameplate 
• Inverter Duty Rating on Nameplate
(1 to 200 HP, 4- & 6-Pole)

Construction
• Cast Iron Frame & Bearing Brackets 
• Shaft Slinger Protection 
• Multi-Mounton 140 Through 445 & N449 Frames 
• Gasket Provided Between Motor Frame & Conduit Box 
• Typical Unfiltered Vibration Levels of 0.08 Inches/Second or Less 
• IP54 Protection 
• Multiple Drain Provisions for Horizontal & Vertical Mounting

Conduit Box
• Gasketed Cast Iron Construction 
• Provision for Grounding 
• Terminal Lugs on 280 Frame & Larger 
• Rotatable(90°) 
• NPT Drill & Tap Conduit Opening

Bearing System
• Oversized 300 Series Bearings on All Frames (DE&ODE) 
• Regreasable 280 Frame and Larger 
• Locked Drive-End Bearing 210 Frame & Larger 
• Low Temperature-Rise for Extended Life
• L-10 Life of 150,000 Hours for Direct-Coupled Applications 
• L-10 Life of 40,000 Hours for Belted Applications

Insulation System
• Major Components Made from Class H Rated Materials 
• Low-Loss Electrical Steel 
• Exceeds NEMA MG1 Part 31 
• 20:1 Constant Torque & 60:1 Variable Torque (1 to 200 HP, 4-&6-Pole) 
• Voltage Withstand Capability of 2000 V in 0.1μs
• Large Thermal Margins for Extended Life & Reliability 
• Phase Paper & Coil Bracing on Both Ends on All Motor Ratings

Testing
• 100%  No-Load Commercial Test per IEEE 112 on All Motors 
• On 440 Frame & Larger:
» Commercial Test & Vibration Test 
» 100% of Bearings are Ball-Pass Frequency Tested

Severe Duty, Suitable for Use in Division 2 Hazardous Locations

Motors Suitable for Horizontal & Vertical Mounting; Motors also Available with C-Face Mounting

Class F, Exceeds NEMA MG1 Part 31 (Inverter Duty)

3600, 1800, or 1200 RPM 


Toshiba EQP 840 and Toshiba EQP 841 Motors are also available.

Technical Questions to be directed to Syd at 216-765-4230







TOSHIBA EQP SD ELECTRIC MOTORS FOR INDUSTRY